Candy

Good day to all! Help please, I bought a CANDY tabletop dishwasher, connected everything, but it fills with water, then something quietly buzzes for 3-4 minutes, then the program resets and drains the water... maybe someone can tell me where the problem is and how to overcome it. I tried all the programs - no difference, everything is the same. Doesn’t spray water, doesn’t heat... Thanks to...

I would like to fix it myself if something basic is broken. Advice like calling a pro is not accepted! Write to the point, and so: Candy CSF 4570EX machine. 15 years with interruptions in operation. A year ago there was a problem, two light bulbs were on and did not work, the problem was solved by cleaning the strainer at the entrance to the PMM, then I cleaned it several more times, in the end I...

Hello!
When you turn on the Candy Brava dishwasher, all indicators flash once, Error 17 is displayed on the display, and a short repeating beep is constantly emitted. The machine does not respond to key presses. The filters are clean, the machine is about 3 months old. I couldn’t find a clear description of this error. It’s not in the instructions at all.
What could be the problem?

Candy cdcp6 indicator lights up eco and leaks from the far right corner. I called a technician and tightened the sprinkler nut on the left. There was dripping there. It didn’t help. It looks like there is a leak somewhere else in the circulation pump below. The couplings seem to be dry. puddle on the right and along the back wall. Tell me who had the same thing. Where to dig?

Hello everyone. Tell me, Candy CDCP6 dishwasher. During the washing process, the machine switched to ( ECO ) and does not respond to commands, just remains silent. During disassembly I didn’t notice any leaks, everything was dry. After disconnecting from the network and turning it back on, the error continues. What to do? Thanks in advance for your advice.

Hi all!!! Guys, please tell me. The situation is as follows: the wash begins, water is drawn in, the impeller begins to rotate, i.e. washes. After some time, you just hear some kind of hum, you open the door, and there is simply no water in it. Who can say anything, maybe someone has encountered

The dishwasher is leaking. I replaced the pump seal, put it back, and stopped washing it. He pours water, opens the lid with detergent and stands silently. I changed the capacitor, nothing changed. But even with the old capacitor, the motor spins if you pull it out and plug it directly into the network. What could have happened?

Candy machine cdcp6. 3 years of operation. When turned on, the panel displays the status of the creeping line. All modes flash in turn (red lights) - like a creeping line. and so on all the time. It’s like the regime can’t stop. and nothing else happens. There are no leaks or blockages. upon inspection and some analysis everything is normal. After assembly, nothing changes.
Please advise me in...

good afternoon.
Candy Brava CDIN 1D672PB-07
in use for several months, the inscription SALT appeared, I added salt but the inscription did not disappear, several washes have already passed, the salt in the tank seems to be decreasing.
today, following advice from the Internet, I scooped water out of the salt tank twice, then added water, then added salt again, added water, mixed the salt with a...

The upper impeller has stopped rotating. Water flows into it actively. No leaks found. The pressure is good.
We pulled out the top basket. We checked by connecting the shower hose. In normal condition, water flows, the impeller does not rotate. Turned the basket upside down. Water flows in and the impeller rotates. What could be the reason?

Tell me, does the new Candy Trio 9503 41037544 module need to be flashed and configured? When turned on, it beeps, then after pauses there are long squeaks. The LEDs do not light up.

Hello
Candy bravo smile fi
2 weeks after purchase(
Salt, tablets, filtered water

All buttons work except start/reset
Does not respond to touch at all
But when plugged into the socket the button lights up for a second
That is, it is Alive

Pm rearranged but all hoses are connected
There is water, etc.

The Wi-Fi control application doesn’t even allow you to register, it flies off, sends it...

Help me find a salt container that fits Candy CDI 1DS673-07. In stores there is, judging by the photo, one to one like mine, but the description says compatibility with other models...

Good day. After selecting the program, close the Kandy trio. The pump starts immediately. And it doesn’t stop working for 4-5 minutes. After this it starts beeping. In short, it does not switch to the next Water Filling mode. All water leaves the system. Even if you forcefully top it up from (for example) a can. There is no aqua stop. please tell me what to do.

Hello. All indicators on the candy 4609x-07 PM are flashing. What is the reason?

Doesn’t connect to the phone... there is an icon on the car indicating the remote control is on

Please help determine the problem with the CANDY dishwasher. It turns on, fills with water and then stops. No codes appear.

Greetings to forum members. This problem arose 2 years ago. I called a technician, he took the car apart and turned it on. She earned it. Turned it off. And I ran it like that a couple of times. And it worked properly during diagnostics. What was the cause of the malfunction, the master himself did not understand. He paid the master 2 thousand rubles for this. Now there is a similar situation in...

Good afternoon!
When you turn on the machine, the rinsing and drying indicator lights up at the same time, emits 30 signals, and at this time the drain works.
Tell me what this error signals?

Good afternoon!
This is not the first time that the Candy Trio 9501 dishwasher has stopped filling with water.
The program starts, but there are no operating sounds. After about three minutes an error signal is issued.
The existing water is also not drained.
I called the experts twice with the same story. According to the craftsmen, they changed the heating element, removed it a second time and...

Good afternoon, dear forum users!
I am still an inexperienced dishwasher , I ask for your help.
Dishwasher Candy CSF 4590 E. It gave me error E4, I googled it and realized that there was a leak (the sensor was triggered).
I took it apart, and indeed water had accumulated in the pan and, apparently, it had been leaking for a long time, because... everything is in dry detergent.
I washed...

Good afternoon, dears! PMM Candy CDI P96-07 takes in water and then drains. Do this three times. Then error E1 pops up (there are problems with water intake). In fact, it collects water and the pressure changes on the pressure switch. The tube through which pressure is supplied to the pressure switch is dry, clean and not pinched. If you blow into the pressure switch, the changeover contact is...

When turned on, only the first stage is processed (filling can be heard as the valve operates, washing, draining may be completed, or not) and so on for all programs
When restarting with water, if it does not drain (draining can be heard as the valve operates, there is no water, filling can be heard how the valve operates, washing, draining may occur, may not).

Upon completion, all the lights...

In the dishwasher, the baskets for loading dishes are rusty, the factory coating is settling. New baskets cost 10 thousand rubles. This is more than ½ the cost of a new car. The machine itself works great. What can be done in this case? Thank you!

Hello dear forum users! I have owned the PMM for about two years - candy trio 9501x, there have been no problems with the operation of the PMM. Over the past 2 months, a couple of times during the execution of the dishwashing program it gave an error. There is no display on the PMM; according to the symptoms, it seems that it cannot draw water. After turning off the program and restarting it, the...

Good afternoon Tell me how to change the drain hose? Candy CDCF 6S-07. Thank you!

dishwasher candy CD 702 T, is only on program P1, does not change when the buttons are pressed. after pressing start , water is supplied and drained. and the engine spins endlessly. please tell me what is the reason

Dishwasher candy cdcf 6S - stopped draining, the motor was noisy but there was no draining, the repair was shelved, after 3 months - I decided to check its performance and it does not start - at all .... the buttons work except the start button, program selection, delayed start - everything works, but the start button does not respond at all - tell me - what could be wrong? what to repair???

Bought used. I tried the 24-minute mode and ended up washing for 2.5 hours (draining, filling, washing), turned it off manually by holding the start/reset button. I tried other modes, same thing, washes continuously. During operation, the light of the program itself blinks slowly (the one that was selected, I chose different ones) and for some reason the delay start light after 3 hours is on....

I read publications about E03 errors, none of them fit my problem

I’ll describe the essence: the machine floods both on a long

and on an hour-long wash, heats up, washes everything seems to be in

order, but at the end of the wash error E03 appears. When

opening the dishes are very wet and hot (previously this

didn’t notice) and noticed that there was no

water in the salt tank.
I...

Friends!
Today we connected the Candy CDI P50-07 dishwasher, but we couldn’t start it. On the panel, when you press the on/off button, all the indicators first light up, then only the rinse aid and salt indicators go out and light up, and the number 22 appears on the display. The machine does not start. True, they didn’t add salt (they didn’t even know that it was needed), but was it really...

Greetings. We have been using the Candy CSF 4575 E dishwasher for three years. Recently, this problem appeared. A salt coating began to remain on the dishes. We cleaned the finish cartridge. Today we noticed that even after pouring in the rinse aid, its level is not visible through the inspection window. In my opinion, the rinse aid simply does not flow further through the system. Tell me how to...

Maybe someone has encountered this. The dishwasher is broken. More precisely, the drain motor crackled. An autopsy showed that a screw had gotten there. Then I put everything back together. Didn’t start. The leakage sensor was shorted. After all the corrections, everything seemed to work. I started it without dishes. Worked full cycle. After that, when turned on, the program selection lights run...

Good afternoon Friends, tell me maybe someone had a problem. Error E4 came on. How to get rid of it. Thank you in advance

Hello, please help. The candy cdp 4609x-07 dishwasher washes for about 40 minutes, and then it beeps and two indicators Ultra Rapid 24 P4 and soaking P5 flash quickly at the same time. There is only one master in the city and he doesn’t know what it is. We haven’t been able to do anything for a year now. Please reply to my email address: llita-l@rambler.ru.

Hello, I have PMM Candy. For two years it worked like clockwork, and then a terrible thing happened... (it started giving different errors every time... either there is not enough water, then it does not heat up to the required level... now it says that there is too much water coming in... Tell me if there is What’s the point in repairing? And what could it be?) Thank you.