Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
I want to buy a Hyundai 480
there is a question: what will happen if the water turns off during the washing program?
it is clear that there will be an error E1, but what needs to be done after the water is supplied?
restart the program washing according to a new
click "continue" program, if there is one
it will understand that there is water and continue
I want to buy a Hyundai 480 there is a question: what will happen if the water turns off during the washing program? it is clear that there will be an error E1, but what needs to be done after the water is supplied? restart the program washing according to a new click "continue" program, if there is one it will understand that there is water and continue
They filled in the PMM, when starting up, water came in, but the drain was blocked. As a result, error E4 is displayed. The water was removed from the salt compartment with a hose and syringe. There is no visible water. The error is on. Apparently there is water in the pan.
Tell me how to drain the water from the pan?
Last post
We thought it would help. This is the first dishwasher, we didn’t know what to do. It dried out within a day or so, the error lights up after a minute, and not immediately.
Good afternoon.
The machine is only half a year old, it worked just fine from the start.
A month ago it started not heating the water, and subsequently did not wash the dishes.
When you start it a second time, let’s say 90 min. (the same dishes, without a tablet) there is heating, but they are as they should be (straight steam with a rocker)
But again, for no apparent reason, it started working...
Hello, we bought a Bosch PMM, after the 70 degree program the dishes remained wet, although the instructions say that drying is included in this program. What’s wrong? Is the salt and rinse aid indicator on? We used the tablet Finish 3 in 1 . Do I need to add additional rinse aid and salt when using the tablet? And did the kit also come with a strip with a silicone gasket? What is this and where...
We bet on a certain mode, we start. The display shows a washing time of 2.25 hours. It washes for about five minutes, then the time suddenly drops by an hour, the water does not heat up. And as a result, the dishes are not washed properly ((Until today, they set it to the not full load mode, the main thing is on this...
I bought a new dishwasher Bosch SMV25BX01R. Unlike the Bosch dishwasher I used before, it does not remember the last program in which the dishes were washed, but always resets to “eco” mode (50 degrees). This is very annoying. *x) Is there a setting for remembering the last program (60, 70 degrees or whatever I set)? Or set it to constant 60 degrees.
Thank you!
Mobile version
