Samsung

Good afternoon. I have the error tC immediately when I turn on the PMM. Sometimes it disappears and the PMM starts, but does not heat the water. Sometimes an error appears during washing. The heating element is alive, I blame the temperature sensor, but it rings and changes resistance when heated, but this is what the cold value should be. Has anyone encountered this?

Good day. I have owned a Samsung DW50K4010BB PMM for several years now, I didn’t have any particular complaints about the work, except for periodic jumps of the pressure switch, until recently... An error LC appeared, which signals a leak and the machine stops washing... I think, oh well , you never know... I took it out, checked everything.... Dry! The microphone rang, in all its modes,...

Hello, please tell me the Samsung DW50H4050BB dishwasher gives an error NOT according to an error code like a heating sensor, but where exactly is it located and what it looks like I can’t find, or maybe it’s something else that could be the problem.

Good day everyone.
The following problem happened.. The dishwasher DW50H4050BB beeped while washing dishes, drained the water and stopped. Having opened the door, I saw the error NOT on the display. When you turn it on again, the machine tries to start working, buzzes for a while, but does not draw water and displays error 4E. Please tell me the probable reasons and how to check them..
As I...

Greetings! Samsung dishwasher DW50H4030BB error - both Express and Pre-wash indicators are blinking quickly; the dishes are wet, but cold; it looks like the water is not heating. I checked the heating element, it shows resistance, it means it is working, I checked the temperature sensor in a glass of hot water, it shows the resistance to decrease, when you cool it, it shows an increase, I checked...

Hello, tell me where to dig?Samsung dishwasher gives error E3

Hello everyone, please tell me the Samsung dishwasher dw50r4040bb turns on, the indicators are lit but does not start, if this is an error, how to reset it, thank you very much

Please tell me, it sings with stains in all modes, the salt is added, the rinse aid is filled in and the capsule is filled, the water hardness level is at the maximum
Tell me what could be the problem?

Dw50r4040bb indicators light up but does not start

Hello, the sound of the touch buttons of the Samsung dw60m5050bb dishwasher has disappeared, does anyone know how to fix it?

No, I can’t find the firmware for the dw50k4050bb machine, I don’t know what to do, does anyone have a dump?

We bought a new PMM, and the problem immediately started! About 4-5 liters of water are constantly flowing from the valve! Help what could be wrong! Samsung dw60r7050bb!

Good afternoon. PMM Samsung dw50h4030fw. It washes dishes and doesn’t show any errors. But the salt disappears completely in one or two washes. I sprinkle coarse salt, Finish. Water hardness is set to 4. What’s broken? Thank you.

Cannot change water hardness mode according to instructions in Samsung dw50k4030bb (built-in)
5. Press and hold the Delay button, and then press the button Cycle (on a freestanding dishwasher) or START button (Start) (on a fully built-in dishwasher
for 5 seconds.
Press the delay button + START button, the delayed start clock runs.
does not enter the hardness adjustment mode.

The top sprinkler was blocked when it was installed, but it washed.
Does not start again. OS error. There is water from below.
Can I fix it myself? What’s broken?
Please help!

It gives an error pc. The wash begins to fill with water and the error begins to squeak! I open the door and there is water at the bottom. I turn on the small mode and the water drains! What could be the problem! In the book, the error is interpreted as a violation of water drainage. The filter and blades are washed

P/M Samsung dw50h4030bb - the intensive wash indicator (pan) is blinking, this error is not indicated in the instructions, what could this mean? It pops up at the beginning of draining the water, after draining the water the washing cycle does not continue, what should I do???

Hello!

SAMSUNG DW50K4050BB has stopped taking in water. It was showing an error in water supply. I took it apart and checked it with an aquastop multimeter. The aquastop on the bottom works, the aquastop on the hose shows 1 on the resistance. The aquastop valve is not pressed, that is, it seems that there was no activation, but it does not drive water. The machine was rarely used, just over a...

Tell me, who has a similar dishwasher (Samsung DW50H4050BB), if you have such a hole (photo attached). Through this hole, water drips into the pan and the machine stops by mistake LE - leakage!