Chrono

Good afternoon everyone! I had a problem with the circulation pump of the Krona BDE 4507 dishwasher; the motor burned out after 12 years of operation. I found the motor itself on sale without the volute, tried to remove the old one, it cannot be removed. Pumps with a volute are not on sale for this model, apparently discontinued. Can anyone tell me which model of dishwasher I can use to match my...

Hello. I bought a PMM Krona Cascata 60 bi less than a month ago. It washes well, but we were faced with the fact that after each wash, salt remains after drying (from the lid of the container with salt right up to the filter), we set different hardness, the picture does not change. They wipe the bottom after each wash and every other time, the situation repeats itself. Slowly rust begins to...

Hello ! The lamps are lit, no salt and rinse aid are present, programs cannot be selected! If you hold down the program button and turn on the power button, the three lower program lights blink and it starts to drain!

Good afternoon. Dishwasher krona 60126, fills with water and immediately drains. The indicator on the panel flashes that the water supply is too slow. The error repeats until the connector is removed and put back on the reed switch. After this, the program starts, but on the next set of water or after several sets the error repeats. Can someone tell me how to fix this???

Hello! Machine KRONA RIVA 45 FS WH, purchased in 2020. I can’t set the salt consumption. I do it as in the instructions, incl. I hold ECO for 5 seconds, the salt and rinse aid indicators should blink, but for some reason they don’t blink. If anyone knows or has encountered a similar situation, please tell me what’s wrong.
Thanks for your help.

Good day. Recently the issue with error E4 was resolved. I thought life was getting better. and here is E1. The instructions indicate that there is no water supply. The valve is closed. but everything is included. There is pressure. The permostat or whatever they call it pumps. makes noise. The water flows, you can hear it start to turn and the fence goes. It makes noise and makes noise and after...

Good day ! We have crown 4507. The device is 7 years old. I got it after buying an apartment. such a problem. It turned out when removing it to inspect why the water was poured out - the water supply hose to the tank on the right was torn from the fitting. The E4 error has disappeared. turned on. The water was pumped out, and then the fence began, but the connection began to siphon and eventually...

after switching on, the program selection lamps light up simultaneously, except for one lamp, for 1 second. then it doesn’t react to anything.

Dishwasher KRONAsteel BDE 4507 EU.
Doesn’t work. Turns on but doesn’t start. Error E1 flashes - no water supply. I took it apart with my father - the solenoid valve of the inlet hose does not work (does not open water from the faucet for the machine).

What we did:
We disassembled it, rang the resistance of the valve (disconnected it from the circuit) - shows an open circuit (doesn’t even...

The loaded dishwasher with a short wash cycle (without drying) does not heat the water and constantly displays error E3, but if you just restart it for the same cycle without dishes, it heats the water perfectly and washes according to the program. The filters are clean. Well, it doesn’t want to work in the loaded version. The reason of that?

There is no detergent flowing into the machine, but the dispenser is working. When you turn the dispenser manually, the detergent rises, and after stopping, the detergent goes back into the canister. What could be the problem?