Setting the amount of salt supply

Setting the amount of salt supply ⇐ Chrono

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
SRGLEEEEH: Total posts: 2; Joined: 10.05.2020; My dishwasher: Krona RIVA 45 FS WH

Quote

Post by SRGLEEEEH » 10 May 2020, 20:58

Hello! Machine KRONA RIVA 45 FS WH, purchased in 2020. I can’t set the salt consumption. I do it as in the instructions, incl. I hold ECO for 5 seconds, the salt and rinse aid indicators should blink, but for some reason they don’t blink. If anyone knows or has encountered a similar situation, please tell me what’s wrong.
Thanks for your help.

1589137123

SRGLEEEEH

Hello! Machine KRONA RIVA 45 FS WH, purchased in 2020. I can’t set the salt consumption. I do it as in the instructions, incl. I hold ECO for 5 seconds, the salt and rinse aid indicators should blink, but for some reason they don’t blink. If anyone knows or has encountered a similar situation, please tell me what’s wrong.
Thanks for your help.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Setting water hardness

Last post by Evgeny.ivaschenko « 02 May 2017, 13:51
Posted in Hotpoint-Ariston
Replies: 1
by fiximer » 02 Sep 2016, 08:16 » in Hotpoint-Ariston

First post

Good day everyone.
We purchased a HotPoint Ariston LSTF 9M117 C. Question about the initial setting of water hardness: according to the instructions, you need to turn it on, press the P button for 5 seconds, after which it will beep 2 times and the numerical value of water hardness from 1 to 5 will be displayed. For me, after pressing the P button, after 5 seconds it beeps once and displays the...

Last post

have you figured out the setup?
how do you determine the presence of rinse aid on it?

1 Replies

20944 Views

Last post by Evgeny.ivaschenko
02 May 2017, 13:51
Setting water hardness

Last post by Svetlana « 23 Mar 2018, 05:20
Posted in Burning

by Svetlana » 23 Mar 2018, 05:20 » in Burning

Following the instructions for setting the hardness of types in burning model 1211 or 1212 it is impossible to set the value. Can you explain in detail? Dishes with a white coating cannot be washed properly without adding salt.

0 Replies

31583 Views

Last post by Svetlana
23 Mar 2018, 05:20
Candy Brava - the inscription SALT is blinking but there is salt

Last post by Sibiryak22 « 05 Feb 2023, 05:48
Posted in Candy
Replies: 3
by Sibiryak22 » 27 Aug 2022, 09:20 » in Candy

First post

good afternoon.
Candy Brava CDIN 1D672PB-07
in use for several months, the inscription SALT appeared, I added salt but the inscription did not disappear, several washes have already passed, the salt in the tank seems to be decreasing.
today, following advice from the Internet, I scooped water out of the salt tank twice, then added water, then added salt again, added water, mixed the salt with a...

Last post

in general the problem was somehow solved. the salt was almost all gone and the inscription disappeared, I filled it with the same salt almost until it was full - the inscription no longer appeared, everything worked fine.

3 Replies

8778 Views

Last post by Sibiryak22
05 Feb 2023, 05:48
Lst 11677 power supply

Last post by Vityok « 22 May 2022, 19:53
Posted in Hotpoint-Ariston

by Vityok » 22 May 2022, 19:53 » in Hotpoint-Ariston

Please tell me the location of the power supply and how to get to it. After a power surge (zero burnt out) it shows no signs of life. With electronics on You .

0 Replies

6722 Views

Last post by Vityok
22 May 2022, 19:53
No water supply to the yoke

Last post by Denis « 08 Jun 2017, 10:01
Posted in General questions about dishwashers

by Denis » 08 Jun 2017, 10:01 » in General questions about dishwashers

Please tell me why there is no water supply to the yoke?

0 Replies

23504 Views

Last post by Denis
08 Jun 2017, 10:01

Return to “Chrono”