Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Good day everyone.
We purchased a HotPoint Ariston LSTF 9M117 C. Question about the initial setting of water hardness: according to the instructions, you need to turn it on, press the P button for 5 seconds, after which it will beep 2 times and the numerical value of water hardness from 1 to 5 will be displayed. For me, after pressing the P button, after 5 seconds it beeps once and displays the Latin letters A, b or c on the display. What does it mean? How to adjust water hardness? Can I somehow reset all settings to 0 because the first launch was a test run?
Please help me figure this out.
Good day everyone. We purchased a HotPoint Ariston LSTF 9M117 C. Question about the initial setting of water hardness: according to the instructions, you need to turn it on, press the P button for 5 seconds, after which it will beep 2 times and the numerical value of water hardness from 1 to 5 will be displayed. For me, after pressing the P button, after 5 seconds it beeps once and displays the Latin letters A, b or c on the display. What does it mean? How to adjust water hardness? Can I somehow reset all settings to 0 because the first launch was a test run? Please help me figure this out.
Following the instructions for setting the hardness of types in burning model 1211 or 1212 it is impossible to set the value. Can you explain in detail? Dishes with a white coating cannot be washed properly without adding salt.
Hello, tell me how to find out the hardness of water (Chelyabinsk)
Last post
The hardness is different everywhere. The maximum permissible coefficient is 7 mg.eq/l. (degrees). Theoretically, tap water should not be higher than this
Cannot change water hardness mode according to instructions in Samsung dw50k4030bb (built-in)
5. Press and hold the Delay button, and then press the button Cycle (on a freestanding dishwasher) or START button (Start) (on a fully built-in dishwasher
for 5 seconds.
Press the delay button + START button, the delayed start clock runs.
does not enter the hardness adjustment mode.
Hello! Machine KRONA RIVA 45 FS WH, purchased in 2020. I can’t set the salt consumption. I do it as in the instructions, incl. I hold ECO for 5 seconds, the salt and rinse aid indicators should blink, but for some reason they don’t blink. If anyone knows or has encountered a similar situation, please tell me what’s wrong.
Thanks for your help.
Mobile version
Evgeny.ivaschenko