Burning

The first time such an error appeared was about a month ago - I read the instructions - there is water in the pan - contact an authorized service center.
I searched the forums for information - I found recommendations to check for false alarms of the sensor. Remove the side walls and check for the presence or absence of water. I took it off - there is water, less than a millimeter, but apparently...

Good afternoon. I’ll say right away that I’m generally an oak. We watched a video on how to connect a dishwasher without running water and brought it to the dacha. I made a tank of water under pressure and turned it on. I filled half the tank and that was it. It beeps, drains, and does not start the cycle. I do not know what to do

Pmmm burning, after washing it ended up at the bottom of the filter, where could this be from...

Hello. :prosh: Dishwasher Gorenje MGV5121, there is a white coating on the dishes and inside the machine every wash, sometimes there are strong whitish smudges, it is not possible to wash glass and dark dishes at all, as if they had sprinkled flour, as I understand it, this is limescale, powder, rinse aid and finishing salt, different settings for the level of hardness and rinse aid do not give...

Hi all. PMM 6 years. A couple of years ago, the water supply hose at the connection point began to leak. The problem was solved by replacing the factory wire clamp with a worm clamp. Now the rubber O-ring sealing the connection between the inlet fitting and the heat exchanger has squeezed out. There is an assumption that the flood of water has significant resistance in some place, but it is not...

Hello. Gorenje gv66161 dishwasher does not complete the program. At the same time, water remains in the car. If you turn it off and on again, the machine first drains all the remaining water, then it takes in new water and starts washing, but again it does not finish the program. If, after freezing in the middle of the program, you open and close the door again, the dishwasher clicks, then washes...

Hello! Who uses PMM Combustion with the automatic door opening function, please tell me: at what moment should the door open? After the program is completed or during the process? In our instance in the program ECO the door opens 50 minutes before the end of the program, after which the machine stands with the door ajar, with the indicators on, nothing happens in the machine at this time, no...

Good afternoon.
I can’t select a program on the PMM, the machine does not respond to the button.
When you turn it on, it goes to the quick wash and that’s it, the programs don’t switch, the additional buttons do not. functions do not respond,
At the same time, I can change the PMM settings, which I access using the program selection button and the time saving button. That is, the buttons...

Hello!

Please tell me the article numbers or exact names of parts for my model of PPM Gorenje GV51011 so that I can find it in the open spaces and purchase:

1) seal doors P -shaped
2) sealing rubber ring of the upper blade (basket)

image0.jpeg

image1.jpeg

image2.jpeg

image3.jpeg

Hello. Dishwasher gorenje GV51211 at the end of operation, two modes flash: 90 minutes and quick wash. What to do?

After replacing the heating element, the dishes were dirty, and clearing the blockages in the pump, water is leaking a little into the pan, I can’t see where (((, we need to take it apart again quickly, and there is no pressure of Water to the top, there is a trickle of 10-15 cm below, who knows what on this topic??

Good afternoon, dear users-owners of PMM Gorenje.

Problem in GV62012: the machine stops after drawing water and, judging by the sound, after opening the lid of the detergent container. After about a minute of operation, the machine stops, after another couple of minutes the indicator for the selected washing program goes out - at this point the washing process stops completely. There is no error...

Good day! Who knows, please help with advice. There is a PMM Gorenye GV53311, which I really want to throw out... After a year of use, the aquastop stopped working (it seems like that), then some wire came loose and the panel with the buttons stopped working. Then the circulation pump broke due to a manufacturing defect. Then the pressure switch... This is all within 4 years of operation. Now the...

Good day.
Until recently, my PMM Gorenje gv-54311 worked properly. But suddenly, at one moment, something happened to her that I had never seen before. The machine turns on as usual with the touch button, calmly allows you to select a program, but when you close the lid, the program does not start. At the same time, the machine signals that its lid is supposedly open. The machine does not produce...

LED S does not light - no salt, but there is salt

Following the instructions for setting the hardness of types in burning model 1211 or 1212 it is impossible to set the value. Can you explain in detail? Dishes with a white coating cannot be washed properly without adding salt.

Hello! We purchased a used gorenje gvi 7640 built-in dishwasher. We cannot find the instruction manual for it. Maybe someone has it and can send it, or there is an opportunity to pick up a manual for a similar model. Maybe someone can tell me which sites to look at. Thank you in advance!

Hello. I encountered the following problem: there was a burning smell in the dishwasher (gorenje gv 53221), I watched the video and disassembled the door. By the smell I came to a board on which there was something like a fuse. This board is located on the rinse aid tank under the temperature sensor clamp. Part of it has burned out, leaving the inscription BRMT 10595. There is also a smell in the...

Hello. I encountered the following problem: there was a burning smell in the dishwasher (gorenje gv 53221), I watched your videos, and disassembled the door. By the smell I came to a board on which there was something like a fuse. This board is located on the rinse aid tank under the temperature sensor clamp. Part of it has burned out, leaving the inscription BRMT 10595. There is also a smell in...

Good day. The machine began to wash poorly; experimentally I discovered that the middle and upper sprinklers did not rotate. What could be the reason? Thank you in advance. Machine Gorenje 66161.

Hello!
I encountered the following problem.
Water accumulates in the tray in the dishwasher. Immediately after washing there is no water, if you turn off the valve on the water supply, then everything seems to be fine (by the way, that’s what it says in the instructions). But because I usually run the washer at night, then by the morning the tray is full. By the way, I noticed that it even...