Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Good day! Who knows, please help with advice. There is a PMM Gorenye GV53311, which I really want to throw out... After a year of use, the aquastop stopped working (it seems like that), then some wire came loose and the panel with the buttons stopped working. Then the circulation pump broke due to a manufacturing defect. Then the pressure switch... This is all within 4 years of operation. Now the PMM has become insufficient to fill with water. About 1.5 liters are not added with each washing cycle. My husband has already taken it all apart, but he still doesn’t understand the reason (Perhaps there are some sensors that affect the level of water intake? Where can I look for them? I couldn’t find any instructions on the Internet at all (
Good day! Who knows, please help with advice. There is a PMM Gorenye GV53311, which I really want to throw out... After a year of use, the aquastop stopped working (it seems like that), then some wire came loose and the panel with the buttons stopped working. Then the circulation pump broke due to a manufacturing defect. Then the pressure switch... This is all within 4 years of operation. Now the PMM has become insufficient to fill with water. About 1.5 liters are not added with each washing cycle. My husband has already taken it all apart, but he still doesn’t understand the reason (Perhaps there are some sensors that affect the level of water intake? Where can I look for them? I couldn’t find any instructions on the Internet at all (
Good evening
question about the Indesit dishwasher
I finished washing, I don’t unplug the machine, I make a new bookmark and select the washing mode. I turn on the start and: the machine drains the water, then, without ceasing to drain, the water set is turned on and the machine draws and drains water at the same time, after some time (30-60 seconds) it stops, and after a few seconds the water...
Hello
This is a problem - water flows into the dishwasher, through a round thing, I don’t know what it’s for, maybe for drying, I’m attaching a photo.
After the cycle is completed, if you don’t turn off the water supply with the tap manually, it will slowly , water leaks in a small stream and accumulates in the dishwasher itself.
Video here: ObFPgbsxGCY
Last post
The condensate line valve from the heat exchanger may be faulty
1) The water supply valve in the main water supply is closed;
2) The water supply tap installed additionally in front of the inlet hose is faulty;
3) Dirt and slag components get into the receiving screen of the aquastop valve of the inlet hose or the drain is clogged ( in this case, this instruction will help ), most often this happens after planned water supply shutdowns for seasonal...
Last post
Roman, write to info@flavia-rus.ru model name, serial number (available on the right side of the body) with a request to purchase a hose with aquastop, we will select in stock.
Good afternoon, dear forum users.
AEG dishwasher Error 30 is constantly triggered. I removed the side cover, turned on the machine for 30 minutes and noticed that water was emerging from two overflow hoses from the dishwashing chamber. Moreover, the water does not drain constantly, but only when there are 13 minutes left on the display until the end of the wash. I looked at the filters - they...
Mobile version