Vestel

Hello. I’m asking for help repairing my dishwasher. After two years of inactivity, it worked for a couple of months and error F5 began to appear (a problem with drawing water, as I understand it).
After turning on, the machine draws water, then drains and an error pops up, all the indicators begin to blink. I tried it in different operating modes, the result was the same, the only difference was...

vestel VDWL 4513 CW does not heat the water! the heating element is ringing

After a power surge, when the voltage is turned off, the pump works to pump out; when you turn on the machine, buttons 3 and 9 flash, the pump continues to work, but the washing does not start.

Hello! We encountered the same problem with the VESTEL CDF8646WS dishwasher. 3 washing cycles go through, after draining the water, 3 cycles should go into drying mode (natural drying, no heating elements) gives an error (the wash/dry light and pause/stop light flashes at the same time - It is not possible to achieve the desired water temperature due to a malfunction of the heater or sensor...

Hello, while washing dishes in the dishwasher, a creaking sound appeared in the dishwasher, as if from rubber, I started it after washing with a special anti-grease and scale remover, please tell me what this could be, do I need to call a professional, I’m very upset, the deadline just passed the other day Guaranteed, I’m really looking forward to it! :(

Doesn’t heat the water! I checked the whole heater :(

Good afternoon, dishwasher - VESTEL VDWTC 6041. I start the washing cycle, fills with water, starts washing. Opens the compartment with the tablet, after that it washes for another half a minute and starts draining the water, after draining it gives an error F9 - incorrect position of the divider. One master said that it was most likely brains.