Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello. I’m asking for help repairing my dishwasher. After two years of inactivity, it worked for a couple of months and error F5 began to appear (a problem with drawing water, as I understand it).
After turning on, the machine draws water, then drains and an error pops up, all the indicators begin to blink. I tried it in different operating modes, the result was the same, the only difference was time. The drain hose was raised and lowered, no result. I can take photos and record videos. I am ready to pay for an online consultation with a specialist.
Hello. I’m asking for help repairing my dishwasher. After two years of inactivity, it worked for a couple of months and error F5 began to appear (a problem with drawing water, as I understand it). After turning on, the machine draws water, then drains and an error pops up, all the indicators begin to blink. I tried it in different operating modes, the result was the same, the only difference was time. The drain hose was raised and lowered, no result. I can take photos and record videos. I am ready to pay for an online consultation with a specialist.
Good afternoon, dishwasher - VESTEL VDWTC 6041. I start the washing cycle, fills with water, starts washing. Opens the compartment with the tablet, after that it washes for another half a minute and starts draining the water, after draining it gives an error F9 - incorrect position of the divider. One master said that it was most likely brains.
Hello, please tell me the Samsung DW50H4050BB dishwasher gives an error NOT according to an error code like a heating sensor, but where exactly is it located and what it looks like I can’t find, or maybe it’s something else that could be the problem.
Last post
The Samsung dishwasher filled with water and stopped and the NOT error was displayed. Replacing the capacitor of the pump motor helped, the price was 170 rubles. You can get to the condenser through the bottom by removing the pan and the cover with latches. So far everything is working, thanks a lot for the advice. :)
Siemens PMM displays failt no communication . Does not respond to buttons other than on . After turning off, after some time it turns on again and works. It may work for several cycles and this inscription will appear again.???
Hello. Dishwasher Beko DIN24310 The question is, can the water itself drain during washing through a drain hose, such as a self-draining hose, if it is not properly connected to the sewer? The hose lies on the floor and goes directly into the sewer pipe. The pipe is raised from the floor by 10 centimeters. During washing, the following happens. The machine fills with water and starts washing. If...
Last post
3 months have passed, the flight is excellent. The water does not drain, the dishes are washed.
Mobile version
