Whirlpool

Hello. The whirlpool dishwasher wsfe2b19eu ten is working, one of the thermistors barked, which has a red stripe. Tell me what to replace it with and what temperature to select

We recently bought a whirlpool adp550 machine. The simplest and cheapest model of all. We decided to launch it for the first time. Turn it on. It starts working, draws water, then starts beeping and switches to soaking mode, blinks, but nothing happens. This is where all the work stopped *x)
What to do? Please help, we are green in technology :sorry:

Good afternoon to all forum members, I came to you for help! The dishwasher started doing weird things, namely, I turn it on and everything seems to be as usual, it drains the water, then it fills up the water and starts washing, then it heats up the water and everything seems to be working fine, but after a while the pump stops working and stands waiting for something, it can continue to wash a...

After several uses of the PMM, it gave an E4 error, they got scared, called a repairman, it worked for about a week. In the presence of the master, we turn on the PMM, and there is no error, everything works. The master explained that this happens due to a large amount of foam formed during washing, and that detergent, rinse aid and salt can cause this. And if this happens, then the machine takes...

Good afternoon.
Does anyone know what the holes in the side and top walls of a whirlpool dwh m00 w or similar should look like? In this example, out of 4 holes, one has some kind of mesh, and the other 3 are just holes, behind which the white is apparently the outer body of the machine. In this regard, I am tormented by doubts whether water will flow through them?
Thank you.

I purchased a Whirlpool WIC 3C23 PEF dishwasher.
I tried it for the first time on the fast mode, the machine stopped making noise, we waited a long time, but it did not turn off (the beam did not blink on the floor). The power button was blinking, I opened it and took it out, it seemed that the dishes were not washed, the rinse aid had not been used.
I downloaded and turned on the machine for...

Whirlpool 450. Stopped draining water. Removed the drain pump. I discovered this there. It prevented the blades from spinning. Who knows what this is? Is this part of the PMM?

Gentlemen! Please help me figure it out.

Usually, on dishwashers, the upper basket has a “suction cup” which, when the basket is pushed in, tightly clings to the water/washing solution supply fitting located on the back wall, ensuring a normal connection and therefore the required pressure on the upper propeller :) My design is a little strange....
Instead, the fitting is located on the upper...

Where is the fuse located?

Hi all! Happy New Year!

They gave me the current dishwasher here.
I determined that it was leaking from under the aluminum tank. At the junction with the plastic.
At the same time, the plastic itself somehow fits crookedly with the aluminum tank.
I took it apart. Visually, the rubber seal is intact, not damaged or bent.
Assembled, still leaking.

Ordered a new seal. But I still doubt that the...

I can’t find a snail for the RENLIG DW 45 dishwasher; the machine was purchased at IKEA. On the body of the snail there is a marking>PP-T20

Good afternoon
The symptoms are: when I turn it on, it seems to drain water, then it starts to fill up with new water, but at some point it switches to a strange mode - it makes noise for a second, then something clicks and makes a sound, as if it is draining a little water, is silent for a second (even less) and then again - it makes noise, clicks, drains.
Before it all started, the car...