VESTEL CDF8646WS - Dishwashers

VESTEL CDF8646WS ⇐ Vestel

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
ooosnegok: Total posts: 1; Joined: 23.05.2019

VESTEL CDF8646WS

Quote

Post by ooosnegok » 22 Aug 2019, 12:17

Hello! We encountered the same problem with the VESTEL CDF8646WS dishwasher. 3 washing cycles go through, after draining the water, 3 cycles should go into drying mode (natural drying, no heating elements) gives an error (the wash/dry light and pause/stop light flashes at the same time - It is not possible to achieve the desired water temperature due to a malfunction of the heater or sensor heater). During washing, the water temperature corresponds to the set temperature (the heating element is working, the sensor is on and off the heating element). Maybe someone has encountered such a problem (the control board was changed - the same error)

1566469078

ooosnegok

Hello! We encountered the same problem with the VESTEL CDF8646WS dishwasher. 3 washing cycles go through, after draining the water, 3 cycles should go into drying mode (natural drying, no heating elements) gives an error (the wash/dry light and pause/stop light flashes at the same time - It is not possible to achieve the desired water temperature due to a malfunction of the heater or sensor heater). During washing, the water temperature corresponds to the set temperature (the heating element is working, the sensor is on and off the heating element). Maybe someone has encountered such a problem (the control board was changed - the same error) :read:

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

vestel VDWL4513CW

Last post by Alexei « 12 Feb 2019, 10:15
Posted in Vestel

by Alexei » 12 Feb 2019, 10:15 » in Vestel

Doesn’t heat the water! I checked the whole heater :(

0 Replies

28277 Views

Last post by Alexei
12 Feb 2019, 10:15
VESTEL 4513

Last post by Lyudmila « 18 Aug 2019, 15:17
Posted in Vestel
Replies: 1
by Lyudmila » 18 Aug 2019, 12:55 » in Vestel

First post

Hello, while washing dishes in the dishwasher, a creaking sound appeared in the dishwasher, as if from rubber, I started it after washing with a special anti-grease and scale remover, please tell me what this could be, do I need to call a professional, I’m very upset, the deadline just passed the other day Guaranteed, I’m really looking forward to it! :(

Last post

I decided to check everything in the dishwasher again, checked the filters, removed the rocker arms, when I took them off I heard a similar squeak, I decided that they were causing the squeak, I decided to run the shortest program, I think if anything happens, I’ll turn it off immediately, I launched the program, At first the creaking was not loud, then it became quieter and quieter, after a...

1 Replies

26948 Views

Last post by Lyudmila
18 Aug 2019, 15:17
Vestel vdwtc 6041w

Last post by Shadow51665 « 17 Jul 2018, 23:28
Posted in Vestel

by Shadow51665 » 17 Jul 2018, 23:28 » in Vestel

Good afternoon, dishwasher - VESTEL VDWTC 6041. I start the washing cycle, fills with water, starts washing. Opens the compartment with the tablet, after that it washes for another half a minute and starts draining the water, after draining it gives an error F9 - incorrect position of the divider. One master said that it was most likely brains.

0 Replies

28378 Views

Last post by Shadow51665
17 Jul 2018, 23:28
Problems with dishwasher Vestel 4513

Last post by Peter « 27 Sep 2020, 11:16
Posted in Vestel

by Peter » 27 Sep 2020, 11:16 » in Vestel

After a power surge, when the voltage is turned off, the pump works to pump out; when you turn on the machine, buttons 3 and 9 flash, the pump continues to work, but the washing does not start.

0 Replies

33423 Views

Last post by Peter
27 Sep 2020, 11:16
PMM Vestel 6041W displays error F5 after draining

Last post by Kvasius « 12 Dec 2021, 19:23
Posted in Vestel
Replies: 1
by Sergey 62 » 20 Dec 2020, 10:09 » in Vestel

First post

Hello. I’m asking for help repairing my dishwasher. After two years of inactivity, it worked for a couple of months and error F5 began to appear (a problem with drawing water, as I understand it).
After turning on, the machine draws water, then drains and an error pops up, all the indicators begin to blink. I tried it in different operating modes, the result was the same, the only difference was...

Last post

Sergey 62 , same problem, did you solve the problem?

1 Replies

19428 Views

Last post by Kvasius
12 Dec 2021, 19:23

Return to “Vestel”