PMM Samsung DW50K4010BB error "tC"

PMM Samsung DW50K4010BB error "tC" ⇐ Samsung

2 posts • Page 1 of 1

Автор темы
Booka: Total posts: 2; Joined: 21.02.2024

Quote

Post by Booka » 21 Feb 2024, 07:55

Good afternoon. I have the error "tC" immediately when I turn on the PMM. Sometimes it disappears and the PMM starts, but does not heat the water. Sometimes an error appears during washing. The heating element is alive, I blame the temperature sensor, but it rings and changes resistance when heated, but this is what the cold value should be. Has anyone encountered this?

1708498511

Booka

Good afternoon. I have the error "tC" immediately when I turn on the PMM. Sometimes it disappears and the PMM starts, but does not heat the water. Sometimes an error appears during washing. The heating element is alive, I blame the temperature sensor, but it rings and changes resistance when heated, but this is what the cold value should be. Has anyone encountered this?

Forage Harvester

Re: PMM Samsung DW50K4010BB error "tC"

Quote

Post by Forage Harvester » 26 Feb 2024, 09:19

Still, the problem was with the temperature sensor. I replaced the thermistor in it and the error went away. The only thing I felt was that the water began to heat up a little more.

1708935579

Forage Harvester

Still, the problem was with the temperature sensor. I replaced the thermistor in it and the error went away. The only thing I felt was that the water began to heat up a little more.

Post Reply Previous topic Next topic

2 posts • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

PMM SAMSUNG, error "LC"

Last post by Booka « 21 Feb 2024, 07:49
Posted in Samsung
Replies: 14
by P » 29 Dec 2021, 18:46 » in Samsung

First post

Good day. I have owned a Samsung DW50K4010BB PMM for several years now, I didn’t have any particular complaints about the work, except for periodic jumps of the pressure switch, until recently... An error LC appeared, which signals a leak and the machine stops washing... I think, oh well , you never know... I took it out, checked everything.... Dry! The microphone rang, in all its modes,...

Last post

Good afternoon. I came across this topic while looking for a solution to another tC error. But I will also speak out about LC . This error also appears to me periodically. I approached the solution to the problem having a technical education and experience in repairing washing machines, so I determined that the error appears when the pressure switch (water level sensor) does not “see” the level...

14 Replies

34530 Views

Last post by Booka
21 Feb 2024, 07:49
Samsung dishwasher error E3

Last post by Andrey Shagrov « 17 Nov 2022, 15:54
Posted in Samsung

by Andrey Shagrov » 17 Nov 2022, 15:54 » in Samsung

Hello, tell me where to dig?Samsung dishwasher gives error E3

0 Replies

4930 Views

Last post by Andrey Shagrov
17 Nov 2022, 15:54
Samsung DW50H4050BB shows error 4E

Last post by andrewa4 « 25 Nov 2023, 13:29
Posted in Samsung
Replies: 2
by Caves » 26 Jul 2020, 11:49 » in Samsung

First post

Good day everyone.
The following problem happened.. The dishwasher DW50H4050BB beeped while washing dishes, drained the water and stopped. Having opened the door, I saw the error NOT on the display. When you turn it on again, the machine tries to start working, buzzes for a while, but does not draw water and displays error 4E. Please tell me the probable reasons and how to check them..
As I...

Last post

Regarding the error IMG_20231124_234407.jpg 4E is a malfunction associated with filling the machine with water; if it appears at the moment of water supply, then the aquastop should work. You need to start with the inlet hose, or rather with the inlet valve, if everything is in order with it, then there is a possibility that the reed switch, which is located in the side tank, has failed (if you...

2 Replies

23671 Views

Last post by andrewa4
25 Nov 2023, 13:29
Error that is not in the instructions for P/M Samsung dw50h4030bb

Last post by Guest « 15 May 2019, 14:14
Posted in Samsung
Replies: 3
by Irinka » 19 Jul 2018, 14:25 » in Samsung

First post

P/M Samsung dw50h4030bb - the intensive wash indicator (pan) is blinking, this error is not indicated in the instructions, what could this mean? It pops up at the beginning of draining the water, after draining the water the washing cycle does not continue, what should I do???

Last post

Something similar happened - I turned off the car for 12 hours and ventilated it. Everything is over.

3 Replies

39622 Views

Last post by Guest
15 May 2019, 14:14
Samsung dishwasher DW50H4050BB displays the error NOT

Last post by Roman88Rud « 07 Jan 2024, 14:09
Posted in Samsung
Replies: 42
by rgUP » 24 Apr 2018, 10:44 » in Samsung

First post

Hello, please tell me the Samsung DW50H4050BB dishwasher gives an error NOT according to an error code like a heating sensor, but where exactly is it located and what it looks like I can’t find, or maybe it’s something else that could be the problem.

Last post

The Samsung dishwasher filled with water and stopped and the NOT error was displayed. Replacing the capacitor of the pump motor helped, the price was 170 rubles. You can get to the condenser through the bottom by removing the pan and the cover with latches. So far everything is working, thanks a lot for the advice. :)

42 Replies

199290 Views

Last post by Roman88Rud
07 Jan 2024, 14:09

Return to “Samsung”