PMM Candy Trio 9503 - Dishwashers

PMM Candy Trio 9503 ⇐ Candy

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Konarevv

Quote

Post by Konarevv » 01 Nov 2022, 04:33

Tell me, does the new Candy Trio 9503 41037544 module need to be flashed and configured? When turned on, it beeps, then after pauses there are long squeaks. The LEDs do not light up.

1667273633

Konarevv

Tell me, does the new Candy Trio 9503 41037544 module need to be flashed and configured? When turned on, it beeps, then after pauses there are long squeaks. The LEDs do not light up.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Candy trio 9501x does not complete cycle

Last post by Slawka « 14 May 2019, 14:50
Posted in Candy

by Slawka » 14 May 2019, 14:50 » in Candy

When turned on, only the first stage is processed (filling can be heard as the valve operates, washing, draining may be completed, or not) and so on for all programs
When restarting with water, if it does not drain (draining can be heard as the valve operates, there is no water, filling can be heard how the valve operates, washing, draining may occur, may not).

Upon completion, all the lights...

0 Replies

26339 Views

Last post by Slawka
14 May 2019, 14:50
Dishwasher Candy Trio 9501 does not fill with water

Last post by Guest « 19 Sep 2020, 00:14
Posted in Candy
Replies: 1
by Nicholas » 25 Mar 2020, 14:45 » in Candy

First post

Good afternoon!
This is not the first time that the Candy Trio 9501 dishwasher has stopped filling with water.
The program starts, but there are no operating sounds. After about three minutes an error signal is issued.
The existing water is also not drained.
I called the experts twice with the same story. According to the craftsmen, they changed the heating element, removed it a second time and...

Last post

Nikolay, check the air chamber of the pressure switch - most likely it is clogged with grease. (The large black plug installed at the bottom of the filter housing (oblong) is secured with a clamp) . Tilt the machine back 45 degrees (be careful not to break the water inlet and outlet at the back). Then, closer to the front surface, just to the right of the center below, you will see a black rubber...

1 Replies

30293 Views

Last post by Guest
19 Sep 2020, 00:14
candy trio 9501x water intake valve does not turn on

Last post by borodinaries « 27 Dec 2017, 22:36
Posted in Candy
Replies: 1
by borodinaries » 19 Nov 2017, 17:24 » in Candy

First post

Hello dear forum users! I have owned the PMM for about two years - candy trio 9501x, there have been no problems with the operation of the PMM. Over the past 2 months, a couple of times during the execution of the dishwashing program it gave an error. There is no display on the PMM; according to the symptoms, it seems that it cannot draw water. After turning off the program and restarting it, the...

Last post

If there was an RCD, the cause would have been revealed sooner. The diagnosis of the breakdown is a faulty heating element, after replacing which the PMM operates normally. Thanks for your help!!!
Topic is closed.

1 Replies

35211 Views

Last post by borodinaries
27 Dec 2017, 22:36
The Kandy trio doesn't fill the water.

Last post by Sergey « 06 Dec 2021, 10:19
Posted in Candy
Replies: 4
by rhodion » 09 Jul 2020, 19:19 » in Candy

First post

Good day. After selecting the program, close the Kandy trio. The pump starts immediately. And it doesn’t stop working for 4-5 minutes. After this it starts beeping. In short, it does not switch to the next Water Filling mode. All water leaves the system. Even if you forcefully top it up from (for example) a can. There is no aqua stop. please tell me what to do.

Last post

There was a similar problem with candy duo 609 x . I called a technician from a certified service center. With him, the machine worked normally, he measured the resistance of the heating element and said that it was normal, that most likely the “brains” were dying, but they were not available. As a result, after a couple of days the machine refused to work at all, so I started Googling and...

4 Replies

36826 Views

Last post by Sergey
06 Dec 2021, 10:19
Candy PMM

Last post by Olga « 19 Jan 2014, 15:47
Posted in Candy

by Olga » 19 Jan 2014, 15:47 » in Candy

Hello, I have PMM Candy. For two years it worked like clockwork, and then a terrible thing happened... (it started giving different errors every time... either there is not enough water, then it does not heat up to the required level... now it says that there is too much water coming in... Tell me if there is What’s the point in repairing? And what could it be?) Thank you.

0 Replies

38345 Views

Last post by Olga
19 Jan 2014, 15:47

Return to “Candy”