Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello, please help. The candy cdp 4609x-07 dishwasher washes for about 40 minutes, and then it beeps and two indicators Ultra Rapid 24 P4 and soaking P5 flash quickly at the same time. There is only one master in the city and he doesn’t know what it is. We haven’t been able to do anything for a year now. Please reply to my email address: llita-l@rambler.ru.
Hello, please help. The candy cdp 4609x-07 dishwasher washes for about 40 minutes, and then it beeps and two indicators Ultra Rapid 24 P4 and soaking P5 flash quickly at the same time. There is only one master in the city and he doesn’t know what it is. We haven’t been able to do anything for a year now. Please reply to my email address: llita-l@rambler.ru.
The dishwasher is two years old. It began to leave a strong white residue on the dishes. The indicator lights up indicating that the salt has run out. Added a full tank of salt. After two washes, the indicator is on again indicating that the salt has run out and again white coating on dishes and on the walls of the dishwasher. The salt tank is screwed in well. There is a rinse aid. I use finish...
Last post
I solved the problem this way: I simply stopped adding salt. At all. The cellophane on the lid doesn’t help for long. And this is just a way to find out that the problem is the depressurization of the lid/salt tank. After I stopped using salt, everything was fine. I have 3in1 tablets, they have some salt content. Yes, perhaps this will not really save my PMM from failure in the future due to...
Good afternoon
We had some trouble. The flexible hose of the mixer broke. There was quite a lot of water in the kitchen. We fixed the leak, collected the water, dried the floor and began connecting the household appliances back. We discovered that the PMM does not respond to buttons at all. I rolled it out of the headset and saw that water had filled the pan. Accordingly, the control board is...
Last post
Result: the control module burned out. For replacement.
Good afternoon,
Machine dsfs 1530. p1 and p3 flash simultaneously. When you press the start button, p1 and p3 are constantly lit. Doesn’t respond to button presses.
If you press and hold the start button and press on, after three seconds all the LEDs blink, if you press start again, the machine starts draining, you can hear the pump and circulation pump operating, the sound is normal. After...