Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Good afternoon!
When you turn on the machine, the rinsing and drying indicator lights up at the same time, emits 30 signals, and at this time the drain works.
Tell me what this error signals?
Good afternoon! When you turn on the machine, the rinsing and drying indicator lights up at the same time, emits 30 signals, and at this time the drain works. Tell me what this error signals?
When the Kuppersberg GS 4502 was turned on for the first time, it began to take in water, then error E2 was rebooted and started, and now it showed error E5. I can’t understand the normal water pressure, what it needs, has anyone encountered this? I would be grateful for the information.
Good afternoon, dears! PMM Candy CDI P96-07 takes in water and then drains. Do this three times. Then error E1 pops up (there are problems with water intake). In fact, it collects water and the pressure changes on the pressure switch. The tube through which pressure is supplied to the pressure switch is dry, clean and not pinched. If you blow into the pressure switch, the changeover contact is...
Last post
Look at the sensor (impeller + reed switch) on the water dispenser
Hello. Maybe someone has encountered a similar problem. Dishwasher leaks when turned off. I checked it when I turned it on - nothing was running, there was literally one drop. And when turned off overnight, the entire floor in the kitchen floods. The plumber came and said that he didn’t see any problem, everything was fine. What could it be?
:swim: machine 46A53 started the washer..during operation the water was turned off. The machine drained and stood there humming...now it won’t start, it’s buzzing, it won’t fill up with water, I forced water in, it WASHES, it warms up for about 15 minutes * the water doesn’t drain..??How to restart or is something wrong?I would be very grateful for your advice