Other manufacturers - Page 2

Hello, the Zanussi dishwasher refuses to work.
The bottom of the machine is flooded with water. When turned on, the lights come on, but the car does not come to life. They bailed out water, incl. from the filter; The machine started in the rinsing mode, but after a while it stopped - the puddle on the bottom appeared again (it seems to me that after removing the water in the washing mode, it did...

tell me the machine just turns off in the middle of the program what to do

The door does not latch. I don’t know what the reason is. Help, please. *x)

Hello.
Tell me how to get into the menu for adjusting the supply of detergents on this PMM. Model KRUPPS k84oe

Hello.
Dishwasher KUPPERSBERG GLA 689.

The heating time skips.
Example: program 2 (drain, wash 35°, drain, hot rinse, drain)

From 30 to 29 drain
From 29 to 28 water supply
From 28 heating (Ten) and washing are turned on
Heats @ minute

After a minute on the display instead of 27 minutes, immediately 22 minutes and Ten turns off.

Also the hottest rinse. From 15 to 14, fill the water
From the...

Hello, please tell me who has encountered this - all of a sudden, when turned on, it began to make a squeaking sound and the quick wash program indicator blinks. You can also hear the operating noise of either a pump or something else.. While I checked the water supply and drain hoses, everything was fine.. What could it be, I didn’t find anything on this model. Thank you!
Error video: Hello,...

Good afternoon, the spray arm from the monsher mdw12e dishwasher broke off, can I buy one like this, because judging by the photos of other manufacturers, the mount is different.. I am attaching the photo, thank you

I have a Helkama 737 dishwasher, bought secondhand about 10 years ago. Programmer 91207266 timer 0730/1/0.01, stopped clicking, switching actions, because of this, 2 rooms were flooded for the second time today. The machine itself is good, I found a programmer on the Internet, but how do I know if this is the only reason? I don’t want to do expensive diagnostics. Masters and workshops only work...

Such a problem. Everything seems to work as usual, but the water does not heat up. The only thing seems to be that the sound of the drain pump has changed. I poured boiling water on it, but it didn’t help. I haven’t disassembled and measured the heating element, sensors, etc. yet. Maybe someone has pictures of the insides of this models, or any other useful information, I would be grateful.

Good afternoon.
After the welding work (welded the platinum inside the tank, the control unit was turned off), the machine began to ignore the lack of water, did not turn on the water inlet valve, and immediately started the circulation pump motor. The level sensor is working, as is the tube to it.
Please advise: what to pay attention to?
Thanks in advance,
Alexander.

guys, please help me, I urgently need an electrical diagram for ELENBERG DW 9001... help, who can do anything?

Hello!

dishes. machine NEFF S42M65N4EU (E-number S42M65N4EU/44)
Connected. Started to work.
works for 1 minute in any mode. then the timer is reset to 01 min. and shows E14

Problem:: E14

Fault in the drying system
Cause
Fault detected in the drying system or in the water supply system

Solution
Check the water supply system (whether the through-flow valve supplying the hose is not...

Ginzzu dishwasher...the problem is this, the water overflow error lights up...help me solve it

Hello! My Curting dishwasher is almost new. At first everything was fine, but a couple of days ago problems started. After turning it on (after about 5 minutes), it starts beeping and the RAPID button flashes, SOMETIMES the rinse aid button also lights up, although the rinse aid is full. After about 10 minutes, the machine simply turns off, or it washes, but does not dry (of course it does not...

does not drain water. the pump is running. where is her pressure switch?

I want to buy a lower door seal for a Mastercook ZWE-11445X dishwasher.
nicakani@yahoo.com

The machine on the dashboard turns off when you turn on the Kuppersberg gla 689. How to diagnose the malfunction yourself?

Hello everyone! The Wellton WDW t5 dishwasher leaks, but not always. More precisely, sometimes. The first time I thought it was because they spilled a lot of detergent. The last time was recently, there was definitely enough detergent. I opened it up, there was rust on the bottom, I looked at everything - I blame this thing in the photo. This is some kind of float with switches, it looks like it...

Good evening everyone! Please help me with instructions for using the dishwasher: XW-U1-220 Convito, I looked everywhere, couldn’t find anything, I’d be very grateful.

I have a DELFA dishwasher/the lower rocker keeps popping out and therefore the dishes are not washed properly. I adjusted the water pressure with a tap, but it didn’t help. Maybe there is some solution to this problem?

Please provide any information on connecting the automatic detergent dispenser to the Amika 80X PMM (article ST805AMK2).

:( Dishwasher Privilege, approximately 2004, from Germany, used, Molel 6200X, the entire cycle works fine, washes perfectly. During all cycles, the water heats up as expected. But it rinses with cold water. I think the type of drying is condensation with fan. The fan motor works, the fan spins, the drying indicator lights up as expected. There are no instructions or manuals accordingly. Could...

Please tell me if anyone has had this happen. While the spray blades were operating, a knocking sound appeared; they did not cling to anything. what could it be?

Please tell me. The machine does not complete the wash cycle. When opening, the indicator lights up 1. After the reset, you can hear the water draining and the machine stops.
The “master” came and said that there was probably something wrong with the board - but somehow not sure.
Who Have you ever encountered such a problem?

The dishwasher is filled with water, then it should spray. But this doesn’t happen. After turning off the device and repeating the operation, the water is pumped out. Then the water comes in and again nothing.
When you open the lid after taking in the water, the water stands at the bottom. Water flows without problems. Also, after draining, the machine is dry.
What could be broken or clogged?...

I bought a new PPM (I didn’t have one before, I don’t understand them). I managed to complete about 10-12 cycles. The salt and rinse aid indicators do not light up (although according to the instructions they should be enough for 4-6 cycles). The rinse aid level (according to the instructions) can also be determined by eye using special windows. But nothing is clear and it is not visible how much...