Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello, the Zanussi dishwasher refuses to work.
The bottom of the machine is flooded with water. When turned on, the lights come on, but the car does not come to life. They bailed out water, incl. from the filter; The machine started in the rinsing mode, but after a while it stopped - the puddle on the bottom appeared again (it seems to me that after removing the water in the washing mode, it did not start. The machine is located outside the city, so I can’t experiment now). I assume that the problem is with the pump, how correct are my assumptions and what would you recommend to do (how to diagnose) to restore functionality. I’m almost a teapot, but I like to tinker and often achieve success.
Hello, the Zanussi dishwasher refuses to work. The bottom of the machine is flooded with water. When turned on, the lights come on, but the car does not come to life. They bailed out water, incl. from the filter; The machine started in the rinsing mode, but after a while it stopped - the puddle on the bottom appeared again (it seems to me that after removing the water in the washing mode, it did not start. The machine is located outside the city, so I can’t experiment now). I assume that the problem is with the pump, how correct are my assumptions and what would you recommend to do (how to diagnose) to restore functionality. I’m almost a teapot, but I like to tinker and often achieve success.
Dear forum participants!
Unfortunately, our hosting provider had an accident, and the data was restored only as of July 16th.
We apologize for the loss of data over the last 6 days ((
Bosch dishwasher spv40e10ru 2 years old, the module burned out, I bought a new one and installed it, the faucet and the snowflake (star) are blinking, I called the service center and they said it might be necessary to change the front panel, please help me what could be wrong.
Good afternoon. Please tell me, I have the following problem. Dishwasher Hotpoint ariston HIO 3c23wf. Any program works for 5-7 minutes, after which a signal sounds and the washing process stops and the number of the selected program flashes on the screen. There are no errors (no salt or rinse aid). Help with a solution?
Hello! Stopped shooting tablet in the process of washing dishes. I took the door apart. I examined the contents. I rang the coil - 1333 Ohms. Everything is bad? The wires suitable for this coil go somewhere under the bottom of the machine. It’s worth going there and seeing something. If yes, then what? In general, I don’t understand anything about these matters. Or is it easier to order and...
Mobile version
