Washing does not complete. 1 is lit on the indicator

Washing does not complete. 1 is lit on the indicator ⇐ Other manufacturers

Forum rules
Please, when creating a new topic, specify the model of your dishwasher

1 post • Page 1 of 1

Dmitriy

Washing does not complete. 1 is lit on the indicator

Quote

Post by Dmitriy » 28 Oct 2013, 19:17

Please tell me. The machine does not complete the wash cycle. When opening, the indicator lights up 1. After the reset, you can hear the water draining and the machine stops.
The “master” came and said that there was probably something wrong with the board - but somehow not sure.
Who Have you ever encountered such a problem?

1382984276

Dmitriy

Please tell me. The machine does not complete the wash cycle. When opening, the indicator lights up 1. After the reset, you can hear the water draining and the machine stops.
The “master” came and said that there was probably something wrong with the board - but somehow not sure.
Who Have you ever encountered such a problem?

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Bosch SRV55T03EU/30 - does not complete washing after an hour of operation - cyclic glitch

Last post by Alex2110 « 23 Jan 2019, 15:13
Posted in Bosch

by Alex2110 » 23 Jan 2019, 15:13 » in Bosch

Good afternoon

I start the machine, select any operation (except for the lock - everything goes fine here), the remaining time is displayed, close the door and after about an hour the machine glitches and does not proceed to the next washing cycle, rinsing all the time dishes Heating occurs. I open the door, after the time already set for washing, the display shows 1 minute until the end, but...

0 Replies

10683 Views

Last post by Alex2110
23 Jan 2019, 15:13
Gorenje gv66161 dishwasher does not complete the program

Last post by enzof « 10 Nov 2023, 19:35
Posted in Burning
Replies: 21
by enzof » 24 Oct 2017, 19:09 » in Burning

First post

Hello. Gorenje gv66161 dishwasher does not complete the program. At the same time, water remains in the car. If you turn it off and on again, the machine first drains all the remaining water, then it takes in new water and starts washing, but again it does not finish the program. If, after freezing in the middle of the program, you open and close the door again, the dishwasher clicks, then washes...

Last post

The problem was with the door lock. False door open signal. I won’t describe the details, the problem is a design feature. I solved the problem by slightly bending down the upper part of the PMM, where the lock is located. Thus, the lock dropped a couple of mm down and this is enough to avoid false triggering.

21 Replies

66782 Views

Last post by enzof
10 Nov 2023, 19:35
Candy trio 9501x does not complete cycle

Last post by Slawka « 14 May 2019, 14:50
Posted in Candy

by Slawka » 14 May 2019, 14:50 » in Candy

When turned on, only the first stage is processed (filling can be heard as the valve operates, washing, draining may be completed, or not) and so on for all programs
When restarting with water, if it does not drain (draining can be heard as the valve operates, there is no water, filling can be heard how the valve operates, washing, draining may occur, may not).

Upon completion, all the lights...

0 Replies

26328 Views

Last post by Slawka
14 May 2019, 14:50
Bosch 33A13/14 does not heat water, the cycle does not complete

Last post by Guest « 28 Jun 2020, 20:35
Posted in Bosch
Replies: 3
by Serg_Ekb » 21 Jun 2020, 16:40 » in Bosch

First post

Bosh 33A13/14 does not heat water, the cycle does not complete
The resistance of the heating element corresponds to the power (it has not applied direct voltage yet), the temperature sensor changes resistance when heated from 50 to 15 kOhm.
In the case with A water presence sensor is embedded with a heating element; water presses through a rubber membrane on the piston, and it presses on the...

Last post

The soldering of the heating element electromagnetic relay has fallen off on the control board. That is, I just melted away from long work. The relay itself is intact, just soldered. But during disassembly and reassembly, one of the connectors crumbled; it will have to be replaced or some kind of collective farm attached.

3 Replies

17123 Views

Last post by Guest
28 Jun 2020, 20:35
Bosch SMV25FX01R does not complete cycle, faucet blinks

Last post by Guest « 10 May 2021, 17:24
Posted in Bosch
Replies: 4
by Not a bit » 15 Jan 2021, 09:54 » in Bosch

First post

Good afternoon.
The machine has not completed the washing cycle, the faucet is blinking.
An opening revealed no leaks, filters, drain pump, drain hoses are clean.
After assembly, the machine started, draining when the door is opened and resetting the program works.
At the same time, the start of the new washing cycle also did not end (the water got hot), the faucet blinked, the drain went...

Last post

I disassembled the machine myself, down to the screw, everything was clean and dry.

4 Replies

12559 Views

Last post by Guest
10 May 2021, 17:24

Return to “Other manufacturers”