Bosch SRV55T03EU/30 - does not complete washing after an hour of operation - cyclic glitch

Bosch SRV55T03EU/30 - does not complete washing after an hour of operation - cyclic glitch ⇐ Bosch

1 post • Page 1 of 1

Автор темы
Alex2110: Total posts: 3; Joined: 20.04.2018; My dishwasher: bosch srv55to3eu

Bosch SRV55T03EU/30 - does not complete washing after an hour of operation - cyclic glitch

Quote

Post by Alex2110 » 23 Jan 2019, 15:13

Good afternoon

I start the machine, select any operation (except for the lock - everything goes fine here), the remaining time is displayed, close the door and after about an hour the machine glitches and does not proceed to the next washing cycle, rinsing all the time dishes Heating occurs. I open the door, after the time already set for washing, the display shows 1 minute until the end, but the process does not complete. Something prevents her from understanding that it’s time to switch to the next stage. There is water in the pan. I forcefully drain it by pressing two buttons on the control panel. The subsequent launch also does not complete. What is the reason? Please help.

1548252813

Alex2110

Good afternoon 

I start the machine, select any operation (except for the lock - everything goes fine here), the remaining time is displayed, close the door and after about an hour the machine glitches and does not proceed to the next washing cycle, rinsing all the time dishes Heating occurs. I open the door, after the time already set for washing, the display shows 1 minute until the end, but the process does not complete. Something prevents her from understanding that it’s time to switch to the next stage. There is water in the pan. I forcefully drain it by pressing two buttons on the control panel. The subsequent launch also does not complete. What is the reason? Please help.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Washing does not complete. 1 is lit on the indicator

Last post by Dmitriy « 28 Oct 2013, 19:17
Posted in Other manufacturers

by Dmitriy » 28 Oct 2013, 19:17 » in Other manufacturers

Please tell me. The machine does not complete the wash cycle. When opening, the indicator lights up 1. After the reset, you can hear the water draining and the machine stops.
The “master” came and said that there was probably something wrong with the board - but somehow not sure.
Who Have you ever encountered such a problem?

0 Replies

34297 Views

Last post by Dmitriy
28 Oct 2013, 19:17
Bosch srv55t03eu does not pour water

Last post by THEN « 12 May 2021, 21:25
Posted in Bosch
Replies: 1
by Ars » 19 May 2020, 17:05 » in Bosch

First post

Good afternoon!
I start the sink and it starts draining. Then the machine works as if everything is normal until the very end of the washing mode. And as a result, the machine didn’t spill a drop of water on the dishes at all, I don’t know where the water comes from at the bottom, the capsule is also floating at the bottom.
I turn on the reset - it drains all the water from both the bottom and...

Last post

Good afternoon. I have the same problem with my dishwasher, tell me how you fixed it and what broke. I removed the valve and it doesn’t move rusty. Thank you.

1 Replies

9976 Views

Last post by THEN
12 May 2021, 21:25
BOSCH SRV55T03EU/38 - wash program time is too low

Last post by Mr.Cheese « 06 Mar 2017, 15:39
Posted in Bosch
Replies: 1
by Sergey (Khimki) » 04 Mar 2017, 19:24 » in Bosch

First post

Hello. After turning on the machine, no errors are displayed on the indicator. But when choosing any washing program, the machine shows a significantly reduced time. For example, in the 70 degrees mode - 30 minutes instead of about two hours. Or in Auto 55-65 degrees mode for only 29 minutes. After starting the program, the machine hums and does not wash, water does not fill. What could be the...

Last post

Good afternoon The main problem is that water is not flowing into the dishwasher, we need to deal with it. Most likely the problem is in the aquastop, but there may be other options, look here in more detail:

1 Replies

11676 Views

Last post by Mr.Cheese
06 Mar 2017, 15:39
Bosch SMV25FX01R does not complete cycle, faucet blinks

Last post by Guest « 10 May 2021, 17:24
Posted in Bosch
Replies: 4
by Not a bit » 15 Jan 2021, 09:54 » in Bosch

First post

Good afternoon.
The machine has not completed the washing cycle, the faucet is blinking.
An opening revealed no leaks, filters, drain pump, drain hoses are clean.
After assembly, the machine started, draining when the door is opened and resetting the program works.
At the same time, the start of the new washing cycle also did not end (the water got hot), the faucet blinked, the drain went...

Last post

I disassembled the machine myself, down to the screw, everything was clean and dry.

4 Replies

12569 Views

Last post by Guest
10 May 2021, 17:24
Bosch 33A13/14 does not heat water, the cycle does not complete

Last post by Guest « 28 Jun 2020, 20:35
Posted in Bosch
Replies: 3
by Serg_Ekb » 21 Jun 2020, 16:40 » in Bosch

First post

Bosh 33A13/14 does not heat water, the cycle does not complete
The resistance of the heating element corresponds to the power (it has not applied direct voltage yet), the temperature sensor changes resistance when heated from 50 to 15 kOhm.
In the case with A water presence sensor is embedded with a heating element; water presses through a rubber membrane on the piston, and it presses on the...

Last post

The soldering of the heating element electromagnetic relay has fallen off on the control board. That is, I just melted away from long work. The relay itself is intact, just soldered. But during disassembly and reassembly, one of the connectors crumbled; it will have to be replaced or some kind of collective farm attached.

3 Replies

17134 Views

Last post by Guest
28 Jun 2020, 20:35

Return to “Bosch”