Only clean water for washing.

Only clean water for washing. ⇐ General questions about dishwashers

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
woanarges: Total posts: 1; Joined: 18.02.2016; My dishwasher: beko

Quote

Post by woanarges » 18 Feb 2016, 19:09

Tell the experts what can be done and how to use only clean water intake for washing, without using return water. I’m not interested in saving water. I’m tired of cleaning nozzles, etc. I understand that you can turn off or redirect the waste to the drain, but you also need to feed it with detergent...
Thank you.

1455818985

woanarges

Tell the experts what can be done and how to use only clean water intake for washing, without using return water. I’m not interested in saving water. I’m tired of cleaning nozzles, etc. I understand that you can turn off or redirect the waste to the drain, but you also need to feed it with detergent...
Thank you.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

The dishwasher does not clean well, does not heat the water, and does not complete the cycle. Error "E". Repair methods

Last post by Mr.Cheese « 27 Apr 2016, 18:04
Posted in Flavia

by Mr.Cheese » 27 Apr 2016, 18:04 » in Flavia

(!If you have a washing machine that does not heat the water well, then immediately see the final part of this instruction)

If the dishwasher begins to wash poorly, does not dry dishes well, does not complete the cycle, does not heat the water and, perhaps, also begins to give an error,
is there is a high probability that the cause of these malfunctions is that the water supplied to the...

0 Replies

65903 Views

Last post by Mr.Cheese
27 Apr 2016, 18:04
The water supply does not turn on/washing does not start.

Last post by Vrastrub « 22 Jun 2023, 12:35
Posted in Bosch
Replies: 3
by ViperRUS » 29 Apr 2017, 17:37 » in Bosch

First post

Model Bosch SPS58M02RU.
1. The lid closing sensor is triggered because after closing the lid the digital indicator stops blinking.
2. No errors are displayed.
3. After pressing start, nothing happens, the door does not lock, the digital indicator shows the time until the end of the wash, there is no emergency indication.
Where to dig? If the aquastop valve had not opened on command, I think the...

Last post

ViperRUS , I fixed mine. The launch command did not pass. Those. it was possible to select a program, but after pressing the Start button and closing the door, no power units started working and the countdown did not start - the time for the complete execution of the program remained on the display until error E27 was displayed. After a more thorough inspection, I found a barely visible section...

3 Replies

18626 Views

Last post by Vrastrub
22 Jun 2023, 12:35
DIS-4530 does not clean well

Last post by Guest « 27 Jul 2016, 18:28
Posted in Beko
Replies: 1
by certificates » 22 Jul 2016, 11:26 » in Beko

First post

The dishwasher has been in use for just over a year. After the start of operation, the water hardness value was not set - as it was by default - and it worked. The tableted product ALL in 1 Somat was used. The first months of soap were excellent - the dishes and the dishwasher itself were shining.
It should be noted that the water hardness is high. I don’t know exactly how much - but at the...

Last post

Look here for possible reasons for the appearance of plaque: /viewtopic.php?f=21&t=193 And most likely you have the last option. If you have a question about how to tighten the hardness, it is best for you to contact the manufacturer of your dishwasher, maybe they will fix the problem

1 Replies

38034 Views

Last post by Guest
27 Jul 2016, 18:28
Cdcf 6-07 turns off after filling the washing chamber with water

Last post by Denis3331 « 26 Oct 2020, 17:49
Posted in Candy

by Denis3331 » 26 Oct 2020, 17:49 » in Candy

Greetings to forum members. This problem arose 2 years ago. I called a technician, he took the car apart and turned it on. She earned it. Turned it off. And I ran it like that a couple of times. And it worked properly during diagnostics. What was the cause of the malfunction, the master himself did not understand. He paid the master 2 thousand rubles for this. Now there is a similar situation in...

0 Replies

16184 Views

Last post by Denis3331
26 Oct 2020, 17:49
Bosch SGS59A02EU/42 pumping out water after the washing phase

Last post by Wolfhander « 11 Feb 2024, 17:41
Posted in Bosch

by Wolfhander » 11 Feb 2024, 17:41 » in Bosch

PMM Bosch SGS59A02EU/42
In most cases, when moving from the washing stage to the rinsing stage, the pump turns on and runs until the timer “ends” (stops at 1 minute).
It helps if open the door and pour 1.5-2 liters of water inside. If you catch the moment when 1-2 minutes have passed after turning on the rinsing, then the timer continues normally; if you do this at the “last” minute (the machine...

0 Replies

680 Views

Last post by Wolfhander
11 Feb 2024, 17:41

Return to “General questions about dishwashers”