Dishwasher constantly drains water

Dishwasher constantly drains water ⇐ Siemens

1 post • Page 1 of 1

Stirlitz 0512

Quote

Post by Stirlitz 0512 » 15 Mar 2023, 09:12

The Siemens dishwasher constantly runs the drain pump and does not give any errors. As soon as I turn it on, the pump immediately starts working, there is no water in the sump, AQUASTOP works, the pressure switch works, because when I turn off the pump, it fills with water according to the level and washes and heats. Tell me which direction to go

1678867976

Stirlitz 0512

The Siemens dishwasher constantly runs the drain pump and does not give any errors. As soon as I turn it on, the pump immediately starts working, there is no water in the sump, AQUASTOP works, the pressure switch works, because when I turn off the pump, it fills with water according to the level and washes and heats. Tell me which direction to go

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

The machine often drains water

Last post by Ruslan « 06 Nov 2016, 14:50
Posted in Bosch
Replies: 3
by kirill » 17 Jul 2016, 12:52 » in Bosch

First post

Good afternoon.
We purchased a Bosch dishwasher a year ago and had no problems using it. Now, every time you turn it on, the machine draws water, turns on the faucet indicator and drains the water. So it drains 2 times and then works fine. At the very end, after drying the dishes, the faucet indicator turns on again and freezes in this position until it is turned off.
Has anyone encountered such...

Last post

The problem is about the same, but the machine does not wash the dishes in the end. The following happens: the water supply is turned on. That’s it, the water has filled up. then the screw begins to spin, as I understand it, this is pressure rinsing. Lasts only 5-10 seconds. Then the faucet indicator lights up and that’s it, the water starts draining. WASHING IS COMPLETE!
I turned the car over,...

3 Replies

20769 Views

Last post by Ruslan
06 Nov 2016, 14:50
Fills with water and drains after a while

Last post by Krekc « 06 Feb 2017, 12:14
Posted in Bosch

by Krekc » 06 Feb 2017, 12:14 » in Bosch

The problem is this. After the program starts, the PMM begins to fill in water for about 5 seconds. After which, it waits for 10 seconds, drains the water, starts beeping and stops working. At the same time, the faucet indicator lights up.

0 Replies

19093 Views

Last post by Krekc
06 Feb 2017, 12:14
11477 fills and immediately drains water

Last post by Kreutzkopf « 22 Oct 2021, 18:22
Posted in Hotpoint-Ariston
Replies: 2
by Elias » 06 May 2019, 15:25 » in Hotpoint-Ariston

First post

Good afternoon. The dishwasher began draining water immediately after filling, indicators 1 and 3 were flashing. Moreover, if you open and close the door during a fill, the cycle proceeds normally, either until the end, then until the next fill... I took it apart, no leaks are visible. Where to dig? Thank you.

Last post

The hose to the pressure switch or the pressure switch chamber is clogged

2 Replies

24831 Views

Last post by Kreutzkopf
22 Oct 2021, 18:22
Constantly fills with water.

Last post by Alexander34 « 04 Sep 2021, 16:34
Posted in Electrolux

by Alexander34 » 04 Sep 2021, 16:34 » in Electrolux

Hello! There is a problem with the dishwasher, as soon as I plug the plug into the socket, water immediately starts pouring in.

0 Replies

9232 Views

Last post by Alexander34
04 Sep 2021, 16:34
The new PMM is constantly taking on water

Last post by Guest « 17 Mar 2019, 21:13
Posted in Hansa
Replies: 2
by Oksana » 21 Jan 2018, 07:41 » in Hansa

First post

We bought a new Hansa ZWM 428 WEH PMM, connected it, opened the water tap and water began to fill the PMM. They turned off the water, disconnected it from the network, opened the water again, and it continued to fill. In this case, the water does not drain, it simply rises from the bottom of the PMM. What is the reason? What to do? Change?

Last post

What kind of float?

2 Replies

36656 Views

Last post by Guest
17 Mar 2019, 21:13

Return to “Siemens”