Fills with water and drains after a while

Fills with water and drains after a while ⇐ Bosch

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
Krekc: Total posts: 1; Joined: 06.02.2017

Fills with water and drains after a while

Quote

Post by Krekc » 06 Feb 2017, 12:14

The problem is this. After the program starts, the PMM begins to fill in water for about 5 seconds. After which, it waits for 10 seconds, drains the water, starts beeping and stops working. At the same time, the faucet indicator lights up.

1486379643

Krekc

The problem is this. After the program starts, the PMM begins to fill in water for about 5 seconds. After which, it waits for 10 seconds, drains the water, starts beeping and stops working. At the same time, the faucet indicator lights up.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

11477 fills and immediately drains water

Last post by Kreutzkopf « 22 Oct 2021, 18:22
Posted in Hotpoint-Ariston
Replies: 2
by Elias » 06 May 2019, 15:25 » in Hotpoint-Ariston

First post

Good afternoon. The dishwasher began draining water immediately after filling, indicators 1 and 3 were flashing. Moreover, if you open and close the door during a fill, the cycle proceeds normally, either until the end, then until the next fill... I took it apart, no leaks are visible. Where to dig? Thank you.

Last post

The hose to the pressure switch or the pressure switch chamber is clogged

2 Replies

24833 Views

Last post by Kreutzkopf
22 Oct 2021, 18:22
The machine often drains water

Last post by Ruslan « 06 Nov 2016, 14:50
Posted in Bosch
Replies: 3
by kirill » 17 Jul 2016, 12:52 » in Bosch

First post

Good afternoon.
We purchased a Bosch dishwasher a year ago and had no problems using it. Now, every time you turn it on, the machine draws water, turns on the faucet indicator and drains the water. So it drains 2 times and then works fine. At the very end, after drying the dishes, the faucet indicator turns on again and freezes in this position until it is turned off.
Has anyone encountered such...

Last post

The problem is about the same, but the machine does not wash the dishes in the end. The following happens: the water supply is turned on. That’s it, the water has filled up. then the screw begins to spin, as I understand it, this is pressure rinsing. Lasts only 5-10 seconds. Then the faucet indicator lights up and that’s it, the water starts draining. WASHING IS COMPLETE!
I turned the car over,...

3 Replies

20770 Views

Last post by Ruslan
06 Nov 2016, 14:50
Dishwasher constantly drains water

Last post by Stirlitz 0512 « 15 Mar 2023, 09:12
Posted in Siemens

by Stirlitz 0512 » 15 Mar 2023, 09:12 » in Siemens

The Siemens dishwasher constantly runs the drain pump and does not give any errors. As soon as I turn it on, the pump immediately starts working, there is no water in the sump, AQUASTOP works, the pressure switch works, because when I turn off the pump, it fills with water according to the level and washes and heats. Tell me which direction to go

0 Replies

4441 Views

Last post by Stirlitz 0512
15 Mar 2023, 09:12
Constantly fills with water.

Last post by Alexander34 « 04 Sep 2021, 16:34
Posted in Electrolux

by Alexander34 » 04 Sep 2021, 16:34 » in Electrolux

Hello! There is a problem with the dishwasher, as soon as I plug the plug into the socket, water immediately starts pouring in.

0 Replies

9234 Views

Last post by Alexander34
04 Sep 2021, 16:34
It fills with water, then it hums and that’s it!

Last post by Puppeteer « 07 Sep 2022, 16:39
Posted in Hansa
Replies: 1
by Anton36 » 06 Sep 2022, 17:31 » in Hansa

First post

Good afternoon, mmm hansa zim, after filling the water it buzzes and there is no action. After the reset, you turn on the program, it drains, then it dials, the relay is triggered, it buzzes and that’s all.

Last post

I have the same thing, we came back from vacation and such garbage, before the vacation everything was ok.

1 Replies

6870 Views

Last post by Puppeteer
07 Sep 2022, 16:39

Return to “Bosch”