Beko DSFS 1530 dishwasher is noisy

Beko DSFS 1530 dishwasher is noisy ⇐ Beko

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
DmitroNik: Total posts: 1; Joined: 14.04.2018; My dishwasher: beko DSFS1530

Quote

Post by DmitroNik » 14 Apr 2018, 12:47

Dear forum users, I am asking for help in repairing the beko DSFS1530 dishwasher. When turned on, the machine begins to emit a sharp buzzing, slightly vibrating sound, similar to one of the plastic gears cutting teeth, and the whole one slipping at the cut points. The impression is that the sound is coming from the door or from the right wall of the machine. The signal lamps light up as during normal operation, but neither water intake nor drainage occurs.
I went through all the mechanics, they are intact, the hydraulics are clean and not clogged. Has anyone encountered this or similar? Please help.

1523702841

DmitroNik

Dear forum users, I am asking for help in repairing the beko DSFS1530 dishwasher. When turned on, the machine begins to emit a sharp buzzing, slightly vibrating sound, similar to one of the plastic gears cutting teeth, and the whole one slipping at the cut points. The impression is that the sound is coming from the door or from the right wall of the machine. The signal lamps light up as during normal operation, but neither water intake nor drainage occurs.
I went through all the mechanics, they are intact, the hydraulics are clean and not clogged. Has anyone encountered this or similar? Please help.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Beko dsfs 1530

Last post by Gennady 4609 « 04 Jan 2020, 15:18
Posted in Beko
Replies: 1
by Stanislav » 12 Jun 2017, 20:18 » in Beko

First post

Gentlemen, I am asking you an age-old Russian question and a request for help answering it - WHAT TO DO?
Problem with PMM beko dsfs 1530:
When the power is turned on and the door is closed, the water pump starts working . So it (the pump) can work for a very long time (I checked, i.e. I waited quite a long time, and also simply poured water into the PMM manually), and it can only be stopped by...

Last post

Good afternoon, I am asking you the age-old “Russian” question and asking for help answering it - WHAT TO DO? *
Problem with PMM beko dsfs 1530:
When the power is turned on and the door is closed, the water pump starts working. So it (the pump) can work for a very long time (I checked, i.e. I waited quite a long time, and also simply poured water into the PMM manually), and it can only be stopped...

1 Replies

30008 Views

Last post by Gennady 4609
04 Jan 2020, 15:18
Beko dsfs 1530 flashes p1 and p3

Last post by Vsevolod « 05 Feb 2022, 13:48
Posted in Beko

by Vsevolod » 05 Feb 2022, 13:48 » in Beko

Good afternoon,
Machine dsfs 1530. p1 and p3 flash simultaneously. When you press the start button, p1 and p3 are constantly lit. Doesn’t respond to button presses.
If you press and hold the start button and press on, after three seconds all the LEDs blink, if you press start again, the machine starts draining, you can hear the pump and circulation pump operating, the sound is normal. After...

0 Replies

8345 Views

Last post by Vsevolod
05 Feb 2022, 13:48
Beko dsfs 1530. The pump does not turn off.

Last post by Gennady T « 06 Feb 2023, 18:56
Posted in Beko
Replies: 21
by Eugene » 30 Dec 2013, 19:43 » in Beko

First post

Good afternoon My beko dsfs 1530 took on a full tank of water and started leaking, I plugged it in, the pump turned on and won’t turn off. This happened half a year ago, a week later she came to her senses and started working. Tell me what to do?

Last post

I tilted the machine on its side - water began to flow, removed the pan, wiped everything dry, assembled it, put the machine in place - turned it on - everything works. The leakage protection sensor consists of an ordinary limit switch and a foam float. Thanks for the useful advice, otherwise I was already planning to buy a new one (the current one has been plowing since 2013)!!!

21 Replies

120466 Views

Last post by Gennady T
06 Feb 2023, 18:56
Beko DSFS 1530 rinse aid end indicator does not light up

Last post by WaterSpirit « 21 Nov 2022, 20:02
Posted in Beko

by WaterSpirit » 21 Nov 2022, 20:02 » in Beko

Hello everyone.
PPM Beko dsfs 1530
This problem has stopped showing the indicator that the rinse aid has run out. Previously, everything showed.
When adding rinse aid, it either stopped showing or still remained on. And then suddenly it stopped burning, although I know for sure that the rinse aid has been gone for a long time.
Can you tell me where to dig, maybe someone has already had this?

0 Replies

4892 Views

Last post by WaterSpirit
21 Nov 2022, 20:02
Hello, the BOSCH dishwasher is noisy

Last post by Sergey_5555 « 02 Jun 2021, 20:32
Posted in Bosch
Replies: 3
by Igorsa » 28 May 2021, 18:23 » in Bosch

First post

Hello, the BOSCH SWV 30D30RU dishwasher is noisy. He took it out and tilted it, water flowed out of it. It started working, what’s the reason?

Last post

You need to look for a leak. First of all, tighten (carefully, since they are screwed into plastic) the bolts securing the drain pump cup, they are located inside the working area of the sink, and pay attention to the clamp securing the circulation pump. To check/replace the latter, you need to turn the machine upside down with the tray and remove the tray itself. The pump pumps hot water under...

3 Replies

7543 Views

Last post by Sergey_5555
02 Jun 2021, 20:32

Return to “Beko”