Ariston LI460 does not heat water

Ariston LI460 does not heat water ⇐ Hotpoint-Ariston

1 post • Page 1 of 1

Автор темы
Serg66: Total posts: 1; Joined: 03.11.2016; My dishwasher: ARISTON LI460

Quote

Post by Serg66 » 03 Nov 2016, 09:09

Friends, help me figure out the water is not heating. Everywhere they write three breakdowns: 1. Heating element 2. Relay on the control board. 3. Thermostat
I can’t find where the thermostat is located. The heating element is intact. The relay also looks normal. I can’t find the thermostat. The master came and didn’t find it either, so it’s such a master. I am such a master myself.

1478160546

Serg66

Friends, help me figure out the water is not heating. Everywhere they write three breakdowns: 1. Heating element 2. Relay on the control board. 3. Thermostat
I can’t find where the thermostat is located. The heating element is intact. The relay also looks normal. I can’t find the thermostat. The master came and didn’t find it either, so it’s such a master. I am such a master myself.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

ESI 9620 lox does not heat water

Last post by Shmel « 10 May 2022, 17:35
Posted in Electrolux

by Shmel » 10 May 2022, 17:35 » in Electrolux

The car is 6 years old. Operation intensive. About a year or two ago it stopped heating the water (and drying it by itself). Somehow they continued to use it. Then she started pouring too much water. Changed the pressure switch. And she began to pour water as needed and began to heat it up. Now it has stopped heating the water again, but it pours normally.

I cleaned the pressure switch (and at...

0 Replies

7124 Views

Last post by Shmel
10 May 2022, 17:35
ESL94201L0 does not heat water

Last post by Mr.Cheese « 13 Feb 2017, 16:39
Posted in Electrolux
Replies: 1
by Yulia » 06 Feb 2017, 17:09 » in Electrolux

First post

Good afternoon After washing the dishes, a part was found at the bottom of the PMM (photo attached), we examined all the dishes, such a part could not have fallen off from anywhere! Accordingly, the part is from PMM! What could it be?? Or maybe immediately, or maybe after a couple of days (they didn’t pay attention right away), the machine stopped heating the water and drying! The filters have...

Last post

The PMM always has some water left at the bottom, which is technologically conceived. Because Dishwashers most often use the condensation type of drying (using a temperature difference), then poor water heating will immediately affect the drying too, therefore it is necessary to solve the problem, first of all, of poor heating. Check the filters and drain carefully. If there is too much water at...

1 Replies

23741 Views

Last post by Mr.Cheese
13 Feb 2017, 16:39
doesn't heat water

Last post by Mr.Cheese « 21 Mar 2017, 16:14
Posted in Siemens
Replies: 1
by Vitana » 20 Mar 2017, 20:08 » in Siemens

First post

The machine stopped heating the water; the heater rings; the thermal sensors are checked; one is 100 ohms when heated; the other is open; when heated, it turns on at 35 and 60 degrees. What :sorry: could it be?

Last post

Try cleaning using these instructions

1 Replies

37746 Views

Last post by Mr.Cheese
21 Mar 2017, 16:14
doesn't heat water

Last post by Guest « 14 Nov 2020, 11:51
Posted in Bosch
Replies: 20
by care » 26 Feb 2016, 23:01 » in Bosch

First post

Hello everybody! I would like to describe my experience of repairing a Bosch dishwasher with my own hands, maybe it will be useful to someone. After 3 years of operation, the dishwasher produced strange variations of indicator lights and wet dishes at the end of the wash. Because Having never been in a dishwasher, it was decided to call a professional. The master arrived very quickly and with the...

Last post

What resistance should there be at the terminals? The same thing stopped heating, on the contacts with the red wires there are 19 ohms, there is no call to the ground, the sensor is the same 11 ohm on each arm and between 22.

20 Replies

113575 Views

Last post by Guest
14 Nov 2020, 11:51
Smv50m50ru /74 does not heat water

Last post by Chinese « 17 Sep 2021, 15:56
Posted in Bosch

by Chinese » 17 Sep 2021, 15:56 » in Bosch

Good afternoon. The situation is this: the Bosch smv50m50ru car, after replacing the motor (actuator) for switching the water flow, stopped heating. Everything seems to have been assembled correctly. It works, the cycles go through, but the time doesn’t match now, instead of 30 minutes of quick washing, it washes for over an hour. And only cold water. Ten checked, 20 ohms. What could be the...

0 Replies

5350 Views

Last post by Chinese
17 Sep 2021, 15:56

Return to “Hotpoint-Ariston”