The pump blades are spinning, but the water is not draining

The pump blades are spinning, but the water is not draining ⇐ Bosch

1 post • Page 1 of 1

the decorations

The pump blades are spinning, but the water is not draining

Quote

Post by the decorations » 27 Aug 2022, 13:05

Bosch dishwasher. There was water left after washing. I cleaned the filters and took out the glass and seeds. The pump blades are spinning, but the water is not draining. What could this be? Thank you!

1661598346

the decorations

Bosch dishwasher. There was water left after washing. I cleaned the filters and took out the glass and seeds. The pump blades are spinning, but the water is not draining. What could this be? Thank you!

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Draining water after a minute of operation

Last post by Anton « 20 Aug 2013, 08:43
Posted in General questions about dishwashers
Replies: 1
by Guest » 19 Aug 2013, 19:55 » in General questions about dishwashers

First post

Hello, can you tell me why the dishwasher can drain the water after 1 minute of operation?

Last post

I think all dishwashers start the cycle by draining the water. To collect clean water and wash dishes in it.

1 Replies

17577 Views

Last post by Anton
20 Aug 2013, 08:43
The Bosch dishwasher leaves at 0:00 17 minutes before the end without draining the water.

Last post by Vadim « 19 Dec 2021, 08:41
Posted in Bosch

by Vadim » 19 Dec 2021, 08:41 » in Bosch

The BOSCH dishwasher adds 8-10 minutes 12-14 minutes before the end of the short cycle, then either works normally until the end, but more often 17 minutes before the end it goes away at 0:00, like it’s finished, you open the door, and it’s full of water. The water is hot. If you restart it, the water will drain normally before the cycle starts, but everything will repeat.

0 Replies

5683 Views

Last post by Vadim
19 Dec 2021, 08:41
Error f 15 (pumps are spinning, heating element is checked) what else could it be?

Last post by evafim « 01 Apr 2022, 14:22
Posted in Hotpoint-Ariston

by evafim » 01 Apr 2022, 14:22 » in Hotpoint-Ariston

Hello. Can anyone help, tell me the reason for the error F 15 on the Hotpoint-Ariston PMM brand HSF 03 T 223. This is the situation. When the night washing program is turned on 1. The drain pump starts for 15 seconds 2. The circulation pump starts for 15 seconds (the water inlet valve does not open, the valve is checked by a tester and turned on to 220 V, there is no voltage supplied to the valve...

0 Replies

7598 Views

Last post by evafim
01 Apr 2022, 14:22
Can there be self-draining?

Last post by Romec4707 « 16 Aug 2022, 07:38
Posted in Beko
Replies: 12
by Romec4707 » 21 Apr 2022, 10:01 » in Beko

First post

Hello. Dishwasher Beko DIN24310 The question is, can the water itself drain during washing through a drain hose, such as a self-draining hose, if it is not properly connected to the sewer? The hose lies on the floor and goes directly into the sewer pipe. The pipe is raised from the floor by 10 centimeters. During washing, the following happens. The machine fills with water and starts washing. If...

Last post

3 months have passed, the flight is excellent. The water does not drain, the dishes are washed.

12 Replies

21619 Views

Last post by Romec4707
16 Aug 2022, 07:38
Stopped draining and starting

Last post by Dimon « 27 Dec 2016, 15:32
Posted in Candy

by Dimon » 27 Dec 2016, 15:32 » in Candy

Dishwasher candy cdcf 6S - stopped draining, the motor was noisy but there was no draining, the repair was shelved, after 3 months - I decided to check its performance and it does not start - at all .... the buttons work except the start button, program selection, delayed start - everything works, but the start button does not respond at all - tell me - what could be wrong? what to repair???

0 Replies

34366 Views

Last post by Dimon
27 Dec 2016, 15:32

Return to “Bosch”