PMM Hansa ZWM607IEH does not wash dishes well

PMM Hansa ZWM607IEH does not wash dishes well ⇐ Hansa

1 post • Page 1 of 1

Guest

PMM Hansa ZWM607IEH does not wash dishes well

Quote

Post by Guest » 19 Jan 2020, 13:30

PMM Hansa ZWN601IEH does not wash dishes well due to insufficient water level in the chamber; it does not respond to pressure switch adjustments and even when the pressure switch is turned off, the same level rises

1579437057

Guest

PMM Hansa ZWN601IEH does not wash dishes well due to insufficient water level in the chamber; it does not respond to pressure switch adjustments and even when the pressure switch is turned off, the same level rises

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Hansa zwm 646 ieh does not wash

Last post by nik_vrn « 13 Jan 2023, 13:34
Posted in Hansa

by nik_vrn » 13 Jan 2023, 13:34 » in Hansa

Good day! I turn it on, select the mode - it draws water, the time is counting down but DOES NOT WASH :(, goes through a full cycle, drains the water and beeps that everything has been washed! This happened 2 weeks ago, then it started working on its own. I thought it was some kind of glitch now he doesn’t want to wash anymore and that’s it! Please help advice from the Guru of this forum! Thank...

0 Replies

4379 Views

Last post by nik_vrn
13 Jan 2023, 13:34
Doesn't wash dishes

Last post by Artem « 24 Feb 2021, 09:17
Posted in Discount
Replies: 3
by OLpecudo » 26 Jan 2021, 09:55 » in Discount

First post

Good afternoon, forum members. This is the problem: the PMM turns on, draws water, but does not wash; after the time allotted by the program has passed, it completes the cycle, leaving the dishes in the same condition. Please help

Last post

1. Pollution / most often the holes in the impellers become clogged with food debris, grease and limescale / clean / 2. Increasing the size of the holes / sometimes the holes are corroded by household chemicals. Due to the increase in the size of the holes, the jet pressure becomes weaker, and the impeller rotates poorly or does not rotate at all /replacing impellers/ 3. Wear of the gasket/ over...

3 Replies

16816 Views

Last post by Artem
24 Feb 2021, 09:17
Hansa zim476 H thinks for a long time before starting to wash

Last post by Yupchelnikov « 05 Sep 2022, 16:14
Posted in Hansa

by Yupchelnikov » 05 Sep 2022, 16:14 » in Hansa

Help please.
PMM thinks for a long time before starting to wash the dishes.
Input data. The PMM draws in water quickly and drains just as quickly.
I disassembled the PMM, on the motor that supplies water to the nozzles (where the heating element is still located), everything is fine - there is no dirt, nothing rubs or catches. I also blew out the pressure tube (it was free of contamination)....

0 Replies

5901 Views

Last post by Yupchelnikov
05 Sep 2022, 16:14
Bosh SKS60E18 Doesn't wash dishes

Last post by Guest « 20 Dec 2016, 16:12
Posted in Bosch
Replies: 1
by JolyMix » 20 Dec 2016, 16:09 » in Bosch

First post

So 5 years have passed since its purchase and this is what happened, the sound changed during washing and became very loud as if I inserted the disk into the old drive and the cooler spins very quickly (everything was very quiet before), before there was steam after opening the dishwasher now there is none

Last post

999 So 5 years have passed since its purchase and this is what happened, the sound changed during washing and became very loud it’s like I inserted a disk into an old drive and the cooler is spinning very quickly (everything was very quiet before), before, after opening the dishwasher there was steam now there is none and the dishes are cold. The only mode when selected that everything remains...

1 Replies

16861 Views

Last post by Guest
20 Dec 2016, 16:12
The dishes are not always clean, there is a white coating, the powder is not washed out and sometimes gets attached to the dishes.

Last post by Arseny « 12 Apr 2023, 08:30
Posted in AEG
Replies: 4
by MyDoHoles » 10 Feb 2023, 10:28 » in AEG

First post

What to do? Can some parts be replaced? Maybe add a conditioner?

Last post

You need to add salt

4 Replies

10100 Views

Last post by Arseny
12 Apr 2023, 08:30

Return to “Hansa”