Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello. The Bosch smv69t40/Ru dishwasher began to leak. Visually from the hole in the form of a process on the bowl. When pumping out it pours heavily. To seal the bowl, I decided to use repair kit 12005744. But Bosch service says that it will not work for this machine and you need to take a whole glass. WHO knows if this repair kit will fit my car.
Hello. The Bosch smv69t40/Ru dishwasher began to leak. Visually from the hole in the form of a process on the bowl. When pumping out it pours heavily. To seal the bowl, I decided to use repair kit 12005744. But Bosch service says that it will not work for this machine and you need to take a whole glass. WHO knows if this repair kit will fit my car.
I found a gasket in the filter. Exactly the same one is located where the atomizer connects to the body. But it has a slightly smaller diameter. Where could it have fallen from? Or were there 2 of them and this one just stretched out? Can anyone tell me how many seals there should be? Model mid60s100
Last post
First of all, the question is not about the filter. Secondly, no one understood it.
Friends, should there be some kind of oil seal on the shaft or does the seal come only through a washer? Bosch machine, circulation pump impeller
Last post
There are 3 seals in total throughout the pump, 2 small and one large
Re: Bosch SMV69T10EU/15 Error E24 (Post deadog #2146)
If these 2 small ones are available, then there should be nothing else
Hello. It leaks through the dispenser seal on the PMM KDI 45570 and I can’t figure out how to remove it. Could you explain to me how it is attached and how it is removed. Saipu dispenser number model sp-d02b.
Thank you.
The Bosch SRV55T03EU dishwasher began to leak. I removed the front wooden panel - it turned out that the lower door seal had broken. The seal is quite peculiar (see picture) catalog number 00357028. I can’t figure out how to replace it. I completely removed the front cover of the dishwasher. The powerful door opening springs are not fixed and this makes replacement work very difficult. Can anyone...
Mobile version
Автор темыmaxim.stebunov