Bosch SMI63M05EU/02 program ends early.

Bosch SMI63M05EU/02 program ends early. ⇐ Bosch

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Автор темы
XPS: Total posts: 1; Joined: 01.02.2015; My dishwasher: SMI63M05EU/02

Quote

Post by XPS » 01 Feb 2015, 13:44

Periodically, the machine does not wash the dishes; the program ends early (on the indicator 00), and you can use the buttons to select another program, but the program does not start and the machine does not turn off with the button.
There are no error messages.
If you turn it off from the socket and turn it on, then the machine returns to normal.

What do you recommend on how to repair it?

1422794665

XPS

Periodically, the machine does not wash the dishes; the program ends early (on the indicator 00), and you can use the buttons to select another program, but the program does not start and the machine does not turn off with the button.
There are no error messages.
If you turn it off from the socket and turn it on, then the machine returns to normal.

What do you recommend on how to repair it?

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

Dishwasher leaks AFTER program ends

Last post by Sergei K. « 11 Mar 2023, 09:57
Posted in Bosch

by Sergei K. » 11 Mar 2023, 09:57 » in Bosch

Hello! PMM - built-in BOSH 2007 It flows as if from under the left side plastic tank (the plastic tank itself is intact - I checked it in the bathroom for air bubbles) ONLY AFTER the completion of the program (when the inner walls of the working chamber are abundantly covered with condensate). Is it possible that the metal tank leaks on its own? - I’m at a loss..
If this is so, then what sealant...

0 Replies

3491 Views

Last post by Sergei K.
11 Mar 2023, 09:57
Siemens sr64e001ru ends the program almost immediately

Last post by Artem « 16 Nov 2022, 19:42
Posted in Siemens
Replies: 2
by wAnTed » 07 Feb 2021, 14:25 » in Siemens

First post

Hi all. I bought a used Siemens PMM sr64e001ru, the problem was with a leak, otherwise the machine worked flawlessly (according to the seller). I removed the pan, there was a slight leak from the glass (Bosch and Siemens disease... sealed it). I replaced the door bottom seal (it was torn).
I turned on the machine, no errors. I started it at 70 degrees for testing. The machine begins to “buzz”,...

Last post

See circulation pump. Ring the pump winding and heating element

2 Replies

13518 Views

Last post by Artem
16 Nov 2022, 19:42
Bosch Silence (compact) Does not end the program.

Last post by vladimir.jurich « 28 Jan 2021, 23:07
Posted in Bosch

by vladimir.jurich » 28 Jan 2021, 23:07 » in Bosch

Good people. Tell me, I’ll resuscitate PMM at home. Machine SKS50E12RU/05 ... Works through the program, and upon completion freezes. I think the machine is hanging at the drying stage. I’m not much of a repairman, but apparently there is a problem either in the temperature sensor or in the brain, because throughout the entire hang time the heating element is burning. Tell me where this sensor is...

0 Replies

6266 Views

Last post by vladimir.jurich
28 Jan 2021, 23:07
Bosch SMV40D10RU The program does not go beyond rinsing

Last post by V. Emelyanov « 01 Jul 2019, 19:42
Posted in Bosch
Replies: 2
by Drac0 » 24 Jun 2019, 20:56 » in Bosch

First post

Good afternoon!

The car is already in its third year, there haven’t been any major breakdowns with it. We tried to keep an eye on the salt, but it didn’t always work. We almost always start it on the 70° program, use tablets.

Recently a problem arose: after starting it rinses for 15 minutes and reports with a happy squeak that the work is finished. Doesn’t even open the tablet. Sometimes...

Last post

The program does one rinse cycle and does not go further, it signals this and this may be error E6. What is this? Usually the PMM does three cycles (it’s clear that for any PMM model there is more than one cycle), rinsing two or more times with cold water so that the frozen food particles on the dishes soften, the third, or the last, final cycle is carried out with hot water.

Different PMMs may...

2 Replies

14470 Views

Last post by V. Emelyanov
01 Jul 2019, 19:42
BOSCH SRV55T03EU/38 - wash program time is too low

Last post by Mr.Cheese « 06 Mar 2017, 15:39
Posted in Bosch
Replies: 1
by Sergey (Khimki) » 04 Mar 2017, 19:24 » in Bosch

First post

Hello. After turning on the machine, no errors are displayed on the indicator. But when choosing any washing program, the machine shows a significantly reduced time. For example, in the 70 degrees mode - 30 minutes instead of about two hours. Or in Auto 55-65 degrees mode for only 29 minutes. After starting the program, the machine hums and does not wash, water does not fill. What could be the...

Last post

Good afternoon The main problem is that water is not flowing into the dishwasher, we need to deal with it. Most likely the problem is in the aquastop, but there may be other options, look here in more detail:

1 Replies

11667 Views

Last post by Mr.Cheese
06 Mar 2017, 15:39

Return to “Bosch”