Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
[size=85][color =green]Sent after 1 minute 1 second:[/color][/size] [quote=user3452 post_id=3512 time=1665066409 user_id=1] Good day. The lower door seal on the PPM broke. Tell me the replacement article and where to buy? [/quote] On Avito, from disassembly
The light went out while the machine was running. After that, in the middle of each wash, the machine pumps out the water, and then indicators 2 and 4 begin to flash. After turning off by pressing START/RESET, the machine turns on itself after a few minutes and begins to pump out water that is no longer there, and turns on these indicators. I didn’t find any information in the instructions. I...
Last post
The control module (brain) is located at the bottom front. The lid with two screws opens outwards like a door on hinges, with latches on the left and right. It goes down and out. The module itself is on one latch and the guides are pulled out inside.
Tell me the error code, the 1,3,4 LEDs are blinking, the machine starts the cycle, and after a while it drains the water and the LEDs start blinking, I haven’t found any error code anywhere.
Good afternoon! The dishwasher began to freeze on the washing cycles, but rinsing (program 4) works well. The technician came and took it apart... he says there is a problem with the impeller in the pump, they say replace it (issue price is 8000) and that’s it. But the pump itself works. Everything pumps, disappears.... doubts after the words of the master.... anyone who has an opinion regarding...
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds. We really need to bring the car back to life.
Last post
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds.
Hi all. The following situation arose, the children pulled out the control knob of the program and threw it away. I found another pen from another PMM and now it’s not clear what program is turned on right now? Can someone from such a PMM set the program to 1 and pull out the knob to understand what position the regulator itself is in? Thank you
Mobile version
Fulcrum
