Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds. We really need to bring the car back to life.
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds. We really need to bring the car back to life.
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds.
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds.
Tell me the error code, the 1,3,4 LEDs are blinking, the machine starts the cycle, and after a while it drains the water and the LEDs start blinking, I haven’t found any error code anywhere.
After the self-cleaning cycle in the dishwasher, the following element was found :
Stupid rules *x) do not allow you to leave links. in cross section is similar to the sign of the integral √. V-shaped element in black with a visor in gray. Stiffer than rubber.
Help me understand where this element comes from? He doesn’t fit anywhere. There is no other one like this installed in...
Last post
As I understand it, this is drain protection. There should be 2 grooves. The legs are in them, and the top rests against the wall
Hi all. The following situation arose, the children pulled out the control knob of the program and threw it away. I found another pen from another PMM and now it’s not clear what program is turned on right now? Can someone from such a PMM set the program to 1 and pull out the knob to understand what position the regulator itself is in? Thank you
Good afternoon! The dishwasher began to freeze on the washing cycles, but rinsing (program 4) works well. The technician came and took it apart... he says there is a problem with the impeller in the pump, they say replace it (issue price is 8000) and that’s it. But the pump itself works. Everything pumps, disappears.... doubts after the words of the master.... anyone who has an opinion regarding...
Mobile version
