Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
After the self-cleaning cycle in the dishwasher, the following element was "found":
Stupid rules do not allow you to leave links. in cross section is similar to the sign of the integral √. V-shaped element in black with a "visor" in gray. Stiffer than rubber.
Help me understand where this element comes from? He doesn’t fit anywhere. There is no other one like this installed in the dishwasher. Its length is slightly greater than the depth of the dishwasher. It seems that the width of it "fits" inside the dishwasher, but there are no "ribs" or seats where this element would fit...
After the self-cleaning cycle in the dishwasher, the following element was "found": Stupid rules *x) do not allow you to leave links. in cross section is similar to the sign of the integral √. V-shaped element in black with a "visor" in gray. Stiffer than rubber.
Help me understand where this element comes from? He doesn’t fit anywhere. There is no other one like this installed in the dishwasher. Its length is slightly greater than the depth of the dishwasher. It seems that the width of it "fits" inside the dishwasher, but there are no "ribs" or seats where this element would fit...
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds. We really need to bring the car back to life.
Last post
The Ariston LFT 52177 machine does not work; water pours out when turned on. The display is NOT lit. The error is unknown. The visiting masters say they lost their minds.
Tell me the error code, the 1,3,4 LEDs are blinking, the machine starts the cycle, and after a while it drains the water and the LEDs start blinking, I haven’t found any error code anywhere.
Hi all. The following situation arose, the children pulled out the control knob of the program and threw it away. I found another pen from another PMM and now it’s not clear what program is turned on right now? Can someone from such a PMM set the program to 1 and pull out the knob to understand what position the regulator itself is in? Thank you
Good afternoon! The dishwasher began to freeze on the washing cycles, but rinsing (program 4) works well. The technician came and took it apart... he says there is a problem with the impeller in the pump, they say replace it (issue price is 8000) and that’s it. But the pump itself works. Everything pumps, disappears.... doubts after the words of the master.... anyone who has an opinion regarding...
Mobile version
do not allow you to leave links. in cross section is similar to the sign of the integral √. V-shaped element in black with a "visor" in gray. Stiffer than rubber.
better upload a photo, maybe someone will find out 
