SIMENS sn66v092eu does not start

SIMENS sn66v092eu does not start ⇐ Siemens

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Alexander KIL.

Quote

Post by Alexander KIL. » 10 Jun 2014, 21:21

Hello.
The touch screen machine worked for 1 month. And it refuses to start. Two diodes blink on the display: water supply and rinse aid. Other buttons are not active. The filters inside are clean, nothing is clogged, water flows, no errors are displayed. The master came and went. Bought abroad, no warranty. I will be glad to help.

1402428110

Alexander KIL.

Hello.
The touch screen machine worked for 1 month. And it refuses to start. Two diodes blink on the display: water supply and rinse aid. Other buttons are not active. The filters inside are clean, nothing is clogged, water flows, no errors are displayed. The master came and went. Bought abroad, no warranty. I will be glad to help.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

PPM does not start

Last post by Guest « 07 Nov 2013, 19:18
Posted in Bosch
Replies: 3
by Alexei » 29 Oct 2013, 23:15 » in Bosch

First post

After interrupting the operation of the Bosch PPM (opening the door), the engine does not start! what could it be???

Last post

Maybe some sensor is acting up when hot?

3 Replies

16930 Views

Last post by Guest
07 Nov 2013, 19:18
Doesn't start

Last post by Qwerty « 24 Dec 2023, 12:36
Posted in Midea

by Qwerty » 24 Dec 2023, 12:36 » in Midea

Dishwasher Midea. Only the power button works adequately, most do not. Programs do not switch, the cycle does not start. The door closing sensor is triggered by pressing the incomplete load button. The buttons are all working, there are no “stuck” ones. Model MFD 60S320W

0 Replies

1115 Views

Last post by Qwerty
24 Dec 2023, 12:36
Dishwashing does not start

Last post by Psy40263 « 07 Feb 2024, 11:33
Posted in Electrolux
Replies: 1
by Constantine » 06 Dec 2023, 19:58 » in Electrolux

First post

Good evening, I have an Electrolux ESF9526LOW 911519227, the machine is 1.5 years old.
One fine evening I loaded it, selected the program, pressed start, the washing process indicator came on, but there was silence! The pump did not drain water does not draw water is simply silent, invited a specialist, couldn’t do anything, and so on 7 times. They checked everything, the board was changed by...

Last post

The problem is definitely most likely in the board, there are two identical machines, one has the same problem, but if you put a known good board on it, then the machine works without any problems. So far I haven’t found the reason either, I blame the firmware, but if yours was sewn and there is no result, then you need to try to look for the problem in the module itself

1 Replies

1389 Views

Last post by Psy40263
07 Feb 2024, 11:33
Pmm Bosch won't start

Last post by Mikhail 80 « 02 Oct 2017, 22:29
Posted in Bosch

by Mikhail 80 » 02 Oct 2017, 22:29 » in Bosch

When PMM Bosch is turned on, the “faucet” and “rinse aid” indicators light up and flash. The car doesn’t react to anything. After disconnecting from the network and restarting, it may start, or the same error may appear.

0 Replies

13016 Views

Last post by Mikhail 80
02 Oct 2017, 22:29
Dishwasher won't start

Last post by _long_ « 09 May 2017, 13:45
Posted in Electrolux

by _long_ » 09 May 2017, 13:45 » in Electrolux

When turned on, the dishwasher produces 4 light and sound signals. What kind of malfunction is this?

0 Replies

27474 Views

Last post by _long_
09 May 2017, 13:45

Return to “Siemens”