Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
During the washing process, the machine stops.
The power indicator blinks, code 13 is displayed. The cuvette with the powder is closed, it heats up the water (tried to start a self-cleaning cycle).
Looks like this , only the model is different.
During the washing process, the machine stops. The power indicator blinks, code 13 is displayed. The cuvette with the powder is closed, it heats up the water (tried to start a self-cleaning cycle). Looks like this [youtube]KG5_bdiSYx8[/youtube], only the model is different.
Error 3 popped upWhat tell me, gentlemen, have you encountered this and how to treat it?
Last post
Thanks for the answer!
Initially there was an error 15 - I dealt with it, but after assembly it showed error 3, now I will disassemble it and clean it.
Hello!
Dishwasher Hotpoint HIO 3C23 WF. Error 15. The error does not appear immediately. The machine starts the cycle, draws water, starts washing dishes, but stops with error 15. The heating element is working (checked for breaks and leaks). The wires to the heating element were also checked. On the board brains no no visible damage, swollen capacitors, traces of water, signs of oxidation or...
Last post
The problem is solved by replacing the graphite bushings on the circulation pump. The pump itself is expensive and the craftsmen charge a lot for this work. Although everything changes there simply. Find craftsmen on Avito who print bushings and impellers on 3D printers. Contact them and send me the markings of your pump. It is best to order it together with the impeller, as it is faster to break...
Hello. The dishwasher simply starts humming when connected to the network (it is turned off), here is a video with the sound of this process: xAQIjhMCI84
Washes normally, there are no errors and there haven’t been any, power supply 220-230V, normal grounding, water: pressure, hoses according to instructions, etc. In general, everything is ok, but it buzzes when the power supply is turned on....
Last post
Thank you for writing what is the cause of this noise.
I purchased a Whirlpool WIC 3C23 PEF dishwasher.
I tried it for the first time on the fast mode, the machine stopped making noise, we waited a long time, but it did not turn off (the beam did not blink on the floor). The power button was blinking, I opened it and took it out, it seemed that the dishes were not washed, the rinse aid had not been used.
I downloaded and turned on the machine for...
The dishwasher cleans well, but in the end, when opening the door, it gives error E31. what could it be?
Last post
Hello. Bought a new car Bosch smv6ecx51e. I washed it one cycle. Error E31-00 came out. As a result, I dismantled the side walls. There is water on the tray. Wipe with napkins. I put it to work. Water began to flow from the connection on the plastic tank on the left. I removed the plastic tank. I pressed both gaskets with cones. I installed the tank in place. Ran the cycle. I assembled the sides....
Mobile version