Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
I can’t insert a link to the picture, the forum doesn’t allow it. the sensor is located on the side of the heating element, inside there is a “button” that the water should press on.
on the back side (not where the button is, but where the terminals are) there were strange orange smudges , the consistency is approximately like grease. What is this? Is there grease in these sensors and it has leaked out? Or did this food fat somehow get there?
I can’t insert a link to the picture, the forum doesn’t allow it. the sensor is located on the side of the heating element, inside there is a “button” that the water should press on.
on the back side (not where the button is, but where the terminals are) there were strange orange smudges , the consistency is approximately like grease. What is this? Is there grease in these sensors and it has leaked out? Or did this food fat somehow get there?
Good day, dear experts!
An incomprehensible error has appeared, after starting the program, it turns on and a program that lasts 3 hours passes in 5 minutes and the dishwasher finalizes the program and opens the door
Last post
I found the answer on the forum. It helped.
« Press the Auto Sense and ECO buttons simultaneously for 3 seconds. The display should change from d:On to d:Of
Hello everyone. The Electrolux ESF 2450 W device worked properly for more than 5 years. The water is good, northern, Murmansk region. But for the last couple of days, this situation has been happening: you start it (no matter what program), after working for a while, it turns off. This can be treated by taking it out of its normal place and bending it forward. Then it turns on and works. If you...
The machine has been making a strange sound for 3 cycles already, I tried to start it empty, there is also a sound, the warranty has expired, and out of spite everything is closed. Before calling a repairman (and you don’t know anyone, you’ll have to do it at random), listen to the sound, maybe you have any idea what it is? I’m adding it as an archive, but I can’t video it. And yet, I’ve been...
Hello. When washing, the water is warm and there is no pressure, it just flows and does not rotate the sprayers. Doesn’t show an error. I thoroughly cleaned the filter, tubes, and added anti-scale. It takes up water normally and drains normally. Please tell me what else needs to be checked?
There is a PMM BOSH SRV 55. It is approximately 11 years old. Worked great. Not used often, but used. I stopped washing here. An autopsy showed that the water pressure in the system was very low. From the lower sprinkler the streams rise 10 centimeters and it naturally does not rotate. But it is understandable. The flow from the top is also weak and there is no talk of rotation. I checked...
Last post
Buy a new repair kit. There is also an oil seal there. The glue won’t last long, I glued it with SA.