indesit 0507 works but there is a hum

indesit 0507 works but there is a hum ⇐ Indesit

1 post • Page 1 of 1

Sabina

Quote

Post by Sabina » 05 Dec 2018, 13:28

Please help me understand the cause of the hum. pours water, drains it, warms it up, dismantled the heater and changed the bearings. The hum did not go away. The hum starts as soon as the water is heated. At times there is no hum. I just let the car rinse without heating, there is no hum. everything is working.

1544012884

Sabina

Please help me understand the cause of the hum. pours water, drains it, warms it up, dismantled the heater and changed the bearings. The hum did not go away. The hum starts as soon as the water is heated. At times there is no hum. I just let the car rinse without heating, there is no hum. everything is working.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

How condensation drying works

Last post by Mr.Cheese « 09 Mar 2017, 15:53
Posted in Flavia

by Mr.Cheese » 09 Mar 2017, 15:53 » in Flavia

Condensation drying is the most common type of drying on dishwashers. This type of drying has become so popular due to its simplicity and reliability.

The principle of condensation drying is as follows:

At the drying stage, the dishwasher sprays water on the dishes increased temperature.
Due to the fact that the walls of the dishwasher are at a lower temperature, water evaporates from the...

0 Replies

34249 Views

Last post by Mr.Cheese
09 Mar 2017, 15:53
Works loudly, hum smv68ix00e

Last post by Rew1s « 20 Jan 2024, 11:42
Posted in Bosch
Replies: 2
by Rew1s » 13 Jan 2024, 13:05 » in Bosch

First post

Good afternoon, I have encountered a problem. When the dishwasher is operating, a fairly loud hum of operation is heard, low-frequency, similar to the operation of a drill in the next apartment (not very loud, but unpleasant)
The sound comes from the bottom right of the dishwasher.
I did all the basic things that could be done before disassembling the dishwasher. I made sure that nothing was...

Last post

For some reason I have a suspicion that this may be a problem with the bushings of the circulation pump, the only question is that this sound occurs throughout the entire washing cycle. Does the circulation pump work throughout the entire wash?
In any case, today or tomorrow they will disassemble the machine and see what’s there

2 Replies

1226 Views

Last post by Rew1s
20 Jan 2024, 11:42
BOSCH SRV55TO3EU - only the pump works

Last post by Want to know everything « 06 Feb 2018, 17:35
Posted in Bosch
Replies: 6
by alwol » 28 Jun 2017, 13:06 » in Bosch

First post

Good afternoon.
During the rinsing mode, it seemed that the machine was rinsing (working) for a long time - I just turned it off, I thought it was a glitch.
A day later I loaded it, turned it on, but only the pump works (water gurgles below), poured two mugs of water - the water goes away. I took a video of how it works. What to do?
lvykagm8itw n
Now I checked again - with the door open, I turn...

Last post

Hi all! I found a topic based on the PMM model and, in order not to create a similar one, I will continue the existing one.
So, at first I didn’t wash it until about rinsing. It was turned off by my wife on suspicion that the washing process took too long. Disabled. Looked around. Nothing but water in the pan. I did not completely remove the water with napkins. Did not help. I called a repairman...

6 Replies

15547 Views

Last post by Want to know everything
06 Feb 2018, 17:35
The programmer either works or doesn't work

Last post by Svetlana « 13 Jul 2019, 13:37
Posted in Other manufacturers
Replies: 1
by Svetlana » 06 Jul 2019, 18:13 » in Other manufacturers

First post

I have a Helkama 737 dishwasher, bought secondhand about 10 years ago. Programmer 91207266 timer 0730/1/0.01, stopped clicking, switching actions, because of this, 2 rooms were flooded for the second time today. The machine itself is good, I found a programmer on the Internet, but how do I know if this is the only reason? I don’t want to do expensive diagnostics. Masters and workshops only work...

Last post

The first reason has been established - the arcotronics 1.27.6sc3 mkp 4mF starting capacitor does not work, what can I replace it with or where can I buy it? I’m asking for advice

1 Replies

28421 Views

Last post by Svetlana
13 Jul 2019, 13:37
How the Beko 6630S dishwasher works

Last post by Shadows « 06 Mar 2022, 12:27
Posted in General questions about dishwashers
Replies: 2
by Shadows » 06 Mar 2022, 10:37 » in General questions about dishwashers

First post

Good afternoon There is a Beko 6630S dishwasher with burnt out switching and control modules. I plan to make my own switching and control board. I don’t have a clue how the water filling system works.
Well, more precisely, I know that the valve opens, then the water flows through the pressure switch into the working chamber. When there is water, the pressure switch opens the reed switch, but how...

Last post

Beko does not cooperate on such issues

2 Replies

9484 Views

Last post by Shadows
06 Mar 2022, 12:27

Return to “Indesit”