ringing heating elements

ringing heating elements ⇐ Bosch

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Sergej3105

Quote

Post by Sergej3105 » 28 Jul 2018, 11:27

Good day. The Bosch SMS30E02EU dishwasher has stopped heating water. I decided to look at the heating element. It is in the 1st generation pump. 7 contacts (not 3). And it rings strangely. Everywhere there is a lot of information about the ringing of 3-pin heating elements. And what is the resistance of 7 pins, there is nothing anywhere. Can anyone help? It seems like the first 4 terminals are the heating element, and the next 3 are probably the sensor. What and where should there be resistance? The first 4 terminals under the chip: the 1st does not ring with anything. 2-3 is about 20 ohms, 3-4 is also about 20 ohms, and between 2 and 4 is about 40 ohms. It’s all right ? Thanks in advance for your answers.

1532770055

Sergej3105

Good day. The Bosch SMS30E02EU dishwasher has stopped heating water. I decided to look at the heating element. It is in the 1st generation pump. 7 contacts (not 3). And it rings strangely. Everywhere there is a lot of information about the ringing of 3-pin heating elements. And what is the resistance of 7 pins, there is nothing anywhere. Can anyone help? It seems like the first 4 terminals are the heating element, and the next 3 are probably the sensor. What and where should there be resistance? The first 4 terminals under the chip: the 1st does not ring with anything. 2-3 is about 20 ohms, 3-4 is also about 20 ohms, and between 2 and 4 is about 40 ohms. It’s all right ? Thanks in advance for your answers.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

How does a dishwasher work? 3D animation of the operation of the internal elements of a dishwasher.

Last post by Anastasia « 13 Jul 2016, 21:02
Posted in Flavia
Replies: 1
by Mr.Cheese » 04 May 2016, 16:30 » in Flavia

First post

Dishwasher Flavia from the inside.

Flavia_Key_technology.jpg

Circulation system. 3 S-shaped nozzles.
Circulation_system.jpg

Filtration system. Easy to disassemble, with a maximum area of filter elements, prevents clogging.
filtr_system.jpg

Motor with speed control function. Saves water and energy consumption for higher productivity and protection of the environment.
motor.jpg...

Last post

This is very interesting :good: Thank you very much!

1 Replies

32225 Views

Last post by Anastasia
13 Jul 2016, 21:02
Don't use 220 volt heating.

Last post by jotovia « 26 Jul 2023, 13:30
Posted in Indesit

by jotovia » 26 Jul 2023, 13:30 » in Indesit

INDESIT DSIC 3M19, control unit DEA 601, heating element burned out, replaced with a new heating element 220 volts. It worked for exactly 4 days and stopped heating again. The heating element is working, I checked it at direct 220 volts, it heats for a short time, everything is fine. But from the output of the block to the heating element, at the terminals there is not 220 but 119 volts. The...

0 Replies

2890 Views

Last post by jotovia
26 Jul 2023, 13:30
How to find out which heating element is used in PMM?

Last post by Pigeon « 04 Mar 2024, 18:02
Posted in Electrolux

by Pigeon » 04 Mar 2024, 18:02 » in Electrolux

Model Electrolux ESL95201LO.
I stopped heating the water, the technician called (this is happening in the village with my parents, so there is not a great choice of technicians) said that the heating element had flown, but it’s difficult with them now.
I can’t do it anywhere. find information about the heating element in this model.
Thank you.

0 Replies

429 Views

Last post by Pigeon
04 Mar 2024, 18:02
There is no power to the heating element

Last post by Mountain Compass « 02 Feb 2024, 18:50
Posted in Electrolux
Replies: 6
by Ramsled » 04 Nov 2022, 09:39 » in Electrolux

First post

Hi all! The machine stopped heating (ESL94300LA) I thought the heating element was not ringing. I took it off and saw that one of the temperature sensors was not ringing and had burned out. I know the reason, they cleaned the car with the wrong product (there was a lot of foam), I soldered the temperature sensor directly to the Ten electrode, the circuit began to ring. I connected the heating...

Last post

I have the same story, the chip on the heating element when I call shows 035 v

Didn’t find a solution?
I have the same problem

6 Replies

10281 Views

Last post by Mountain Compass
02 Feb 2024, 18:50
The Weissgauff PM does not take in water after heating.

Last post by Cargo « 07 Jun 2023, 17:53
Posted in Other manufacturers
Replies: 1
by Nikolay90 » 07 Jun 2023, 00:55 » in Other manufacturers

First post

Direct your thoughts, if possible, in which direction to look for the breakdown?

Dishwasher Weissgauff DW 4012 starts to work properly, but after about an hour of operation, in a heated state, it suddenly shows a squeaking error - icon rinse (according to the instructions - this icon also means an error code: lack of pressure in the water supply system or a faulty filling valve). But the...

Last post

The problem may be a faulty fill valve or drain pump. A malfunction of the pressure sensor in the water supply system may also be the cause. It is necessary to check these elements and, if necessary, replace them. It is also worth checking the condition of the dishwasher’s control electronics.

1 Replies

3367 Views

Last post by Cargo
07 Jun 2023, 17:53

Return to “Bosch”