Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello everyone, tell me what could be the reason for the appearance of pinpoint rust stains in the dishwasher and how to deal with it, is there any point at all or is the machine scrapped? Salt I applied it once, after which I immediately started the wash; the stains appeared after two weeks of using the machine. Brand Tuvio, model DF63PT8XI1
P.S. In the photo there are white stains from soda, I tried to remove the stain
Hello everyone, tell me what could be the reason for the appearance of pinpoint rust stains in the dishwasher and how to deal with it, is there any point at all or is the machine scrapped? [url=viewtopic.php?t=164]Salt[/url] I applied it once, after which I immediately started the wash; the stains appeared after two weeks of using the machine. Brand Tuvio, model DF63PT8XI1 P.S. In the photo there are white stains from soda, I tried to remove the stain
Hello. I bought a PMM Krona Cascata 60 bi less than a month ago. It washes well, but we were faced with the fact that after each wash, salt remains after drying (from the lid of the container with salt right up to the filter), we set different hardness, the picture does not change. They wipe the bottom after each wash and every other time, the situation repeats itself. Slowly rust begins to...
Dear citizens, we need help in repairing the p/m!
The lower seal door seal. Water penetrates... and the aqua-stop is activated. Photo of the original is attached. They offer an analogue on the Internet. Mounting and dimensions vary. If anyone has encountered this sealant, please tell me...!
When the machine was working, periodically there was a smell of burnt wiring, I checked and found no reason. One fine day, there was a bang, smoke, and the machine was knocked out. When disassembling it, it turned out that the contact group feeding the heating element had completely melted. Help me find the reason.
At the same time, after the cotton and smoke, I turned the PM back on to the...
Hello everyone.
Almost a year ago, we installed the first PMM in our life, it was connected by repairmen who assembled the kitchen (built-in PMM).
Until recently, everything was fine, but now almost a day after using the PMM at the bottom We find cloudy water, there is no obvious sewer smell, but this is not clean tap water either.
IMG_20231120_194650.jpg
We start the PMM every day at 22-23...
Last post
The problem was found - this is a tee to the common sewer pipe from the kitchen.
I turned the tee over with the branch on the PMM up (it was a little down) and water no longer appears in the PMM.
P. S. It’s very strange that no one here even tried to help. Beaver everyone.