Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello! When connecting the machine, there are two lines on the panel. They called the wizard and said that it was enabled DEMO mode and to exit you need to press three buttons, and he doesn’t know which ones. Help...
Hello! When connecting the machine, there are two lines on the panel. They called the wizard and said that it was enabled [url=viewtopic.php?t=740]DEMO mode[/url] and to exit you need to press three buttons, and he doesn’t know which ones. Help...
Good day. PMM Electrolux 48200 switched to demo mode. I can’t find information on how to disable it. Please tell me who you met?
Last post
Good afternoon, the de dietrich dvh1180gj dishwasher has switched to demonstration mode. how to turn it off? Pressing the start button for 3 or more seconds does not help; there are only 4 keys on the sensor. Trying different clamp combinations also did not give results.
Hi all. I came across a dishwasher in a rented apartment, Indesit D42, but it doesn’t seem to do what it should. I started the washing program, the dishwasher took in a little water and began to hum monotonously. No more signs for 20 minutes.
I decided that it was a breakdown, partially disassembled it, got to the ten, measured the ten for resistance - the multimeter shows different values...
Hi all. Machine Zanussi ZDS-200, more than 10 years old.
On the third day the exhaust pump began to malfunction, I, on the advice of the specialists, did not wait, but immediately bought a new one and replaced it. When I changed it, I put the machine on its back.
After this, the following syndrome appeared: it takes in water, but when it’s supposed to turn on the circulation and start...
Guys who have a bosch sps4hmi3fr dishwasher, tell me: When you press the additional drying mode button, does the time of the general operating mode increase?
Screenshot_20211224-102900_Chrome.jpg
nAnd there is another problem: all the indicators light up and then go out, and the PPM pauses work for a minute, but then recovers and continues to work. Has anyone encountered...
Hello everyone. Tell me, Candy CDCP6 dishwasher. During the washing process, the machine switched to ( ECO ) and does not respond to commands, just remains silent. During disassembly I didn’t notice any leaks, everything was dry. After disconnecting from the network and turning it back on, the error continues. What to do? Thanks in advance for your advice.
Last post
I have the same problem and it beeps. The car leaked. There was water in the pan. The aqua-stop worked. I called a technician and tightened the nut on the left. It didn’t help. It looks like it’s leaking somewhere in the circulation pump. There’s a puddle on the right and back. You’ll have to fix it yourself.
Mobile version