Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hello! There is a PMM, in certain washing modes an error appears (the quick wash and 90 minutes indicators flash quickly), according to the manual it does not heat up to the required temperature. As far as I understand, condensation drying does not work, since the error appears only at the end of the program. Accordingly, when opening the PMM, there is no steam, but the dishes are all warm (not hot). What could have gone wrong? Ten, as far as I understand, is alive, since the water in the sink is heating up. Thank you.
Hello! There is a PMM, in certain washing modes an error appears (the quick wash and 90 minutes indicators flash quickly), according to the manual it does not heat up to the required temperature. As far as I understand, condensation drying does not work, since the error appears only at the end of the program. Accordingly, when opening the PMM, there is no steam, but the dishes are all warm (not hot). What could have gone wrong? Ten, as far as I understand, is alive, since the water in the sink is heating up. Thank you.
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me to understand!
Last post
I won, there were no clamps on the water relay, even from the factory.
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me figure it out!
Win! There were no clamps on the water relay hose and the silicone hose expanded when heated and released pressure. The breakdown was very clever, I had to break my head, and there were no clamps...
Hi all. This problem happened. The dishwasher stopped heating and drying. I checked the filter too. What are the options - what else to see? It doesn’t give any errors. It washes cold and for a very long time (it feels like twice as much). I want to fix it myself - I have the hands. But we need to direct what to do, what to replace.
Last post
So look, I removed the thermistor. At a temperature of about 23 it shows 10290. Then I put it in water (about 60-70 g) - 1980. Moreover, this all happens quickly - 20-30 seconds. I watched the video and it said about 3 minutes. In general, what can you say? is it working or not?
Mobile version