Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hi all. This problem happened. The dishwasher stopped heating and drying. I checked the filter too. What are the options - what else to see? It doesn’t give any errors. It washes cold and for a very long time (it feels like twice as much). I want to fix it myself - I have the hands. But we need to direct what to do, what to replace.
Hi all. This problem happened. The dishwasher stopped heating and drying. I checked the filter too. What are the options - what else to see? It doesn’t give any errors. It washes cold and for a very long time (it feels like twice as much). I want to fix it myself - I have the hands. But we need to direct what to do, what to replace.
So look, I removed the thermistor. At a temperature of about 23 it shows 10290. Then I put it in water (about 60-70 g) - 1980. Moreover, this all happens quickly - 20-30 seconds. I watched the video and it said about 3 minutes. In general, what can you say? is it working or not?
So look, I removed the thermistor. At a temperature of about 23 it shows 10290. Then I put it in water (about 60-70 g) - 1980. Moreover, this all happens quickly - 20-30 seconds. I watched the video and it said about 3 minutes. In general, what can you say? is it working or not?
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me to understand!
Last post
I won, there were no clamps on the water relay, even from the factory.
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me figure it out!
Win! There were no clamps on the water relay hose and the silicone hose expanded when heated and released pressure. The breakdown was very clever, I had to break my head, and there were no clamps...
Good afternoon!
Hansa PPM, the washing cycle was interrupted by opening the door for 5 hours. After closing the door it did not work (it hummed, but did not draw water). There are no leaks, the pan is dry. Leakage sensor (connected to the foam float) - working. The electronic aquastop broke (checked with a voltmeter), replaced it with a new hose with an aquastop. The first start - I took in water...
Mobile version