Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Good afternoon There is an old Ariston L63 on the farm, it works as usual, it carries out the program, the lamps do not show errors, but it makes terrible cracking noises during operation. Video with the work process and cracks
Good afternoon There is an old Ariston L63 on the farm, it works as usual, it carries out the program, the lamps do not show errors, but it makes terrible cracking noises during operation. Video with the work process and cracks [youtube]N-4eeqGqzmU[/youtube] [youtube]y_Gb2Q3CPho[/youtube]
Electrolux ESL6350LO turns off during operation - you have to open the lid, then press the power button - shows the remaining time, close the lid - continues the program, What could be the matter?
what does it look like:
shutdown (by in my opinion) occur at the same time during the program. for example on the program eco (the entire program 2-53) turns off at the very beginning at about...
:hello: :
Hello. The machine worked great until today. It washes the dishes, BUT it stopped signaling the end of the 📡 cycle and does not turn off itself. I have to force it to turn off. What it is? Need a master?
Hello! I bought a dishwasher model 94510 and it came with three capsules of Fairy detergent. When the machine was running, the smell from Fairy could be felt throughout half the apartment (it smelled until the door was opened at the end of the wash). After replacing the capsules with Finish tablets, the smell became much less, but it is still noticeable. Does your machine smell like detergent...
Last post
There should be no foreign odors at all. It gets rid of such smeloff well. I washed my car with it myself to get rid of odors.
Hello everyone. The Electrolux ESF 2450 W device worked properly for more than 5 years. The water is good, northern, Murmansk region. But for the last couple of days, this situation has been happening: you start it (no matter what program), after working for a while, it turns off. This can be treated by taking it out of its normal place and bending it forward. Then it turns on and works. If you...
Mobile version
