Continuously warms - Dishwashers

Continuously warms ⇐ Hotpoint-Ariston

1 post • Page 1 of 1

March

Quote

Post by March » 06 Oct 2020, 17:04

Good day. Please tell me what could be the reason for the constant heating of water
and endless washing in the PPM. That is, the pouring begins, rinses, and the washing begins. This washing process does not stop, just like heating the water. It works in one cycle.

1601996684

March

Good day. Please tell me what could be the reason for the constant heating of water 
and endless washing in the PPM. That is, the pouring begins, rinses, and the washing begins. This washing process does not stop, just like heating the water. It works in one cycle.

Post Reply Previous topic Next topic

1 post • Page 1 of 1

Quick Reply

Subject:

Username:

Change Text Case:

Smilies

View more smilies

This reply contains at least one attachment.

If you wish to attach one or more files enter the details below. You may also attach files by dragging and dropping them in the message box.

Maximum filesize per attachment: 15 MiB.

Filename:

File comment:

Filename	File comment	Size	Status

Similar Topics

Replies

Views

Last post

water flows continuously

Last post by worry « 29 Nov 2020, 22:46
Posted in General questions about dishwashers
Replies: 3
by Andrey Marenkov » 10 May 2017, 08:33 » in General questions about dishwashers

First post

Hello!
Last summer, a CANDY CDP 4609 dishwasher was purchased and placed on a summer veranda in the village. It worked all summer without problems (turned on no more than 10 times). For the winter she was sent to a heated house, which is located 5 meters from the veranda. After the weather warmed up (last weekend), the machine was returned to the veranda and connected. After turning on the power...

Last post

similar situation, PMM Midea was purchased new and stood for 2 years
connected - water pours non-stop. Hmm, I thought and added a kilogram of salt, it still poured.
I removed the side cover - visually everything was ok, I looked at the sensor on the salt tank above the middle, and the salt below
I added salt to the top and everything was ok

3 Replies

33193 Views

Last post by worry
29 Nov 2020, 22:46
Candy 4609X Continuously washes

Last post by Continuously washes « 14 Nov 2016, 12:14
Posted in Candy

by Continuously washes » 14 Nov 2016, 12:14 » in Candy

Bought used. I tried the 24-minute mode and ended up washing for 2.5 hours (draining, filling, washing), turned it off manually by holding the start/reset button. I tried other modes, same thing, washes continuously. During operation, the light of the program itself blinks slowly (the one that was selected, I chose different ones) and for some reason the delay start light after 3 hours is on....

0 Replies

34092 Views

Last post by Continuously washes
14 Nov 2016, 12:14
The modes on the panel flash continuously.

Last post by Fulcrum « 17 Feb 2023, 00:17
Posted in Candy
Replies: 1
by Alexsei » 16 Feb 2023, 17:02 » in Candy

First post

Candy machine cdcp6. 3 years of operation. When turned on, the panel displays the status of the creeping line. All modes flash in turn (red lights) - like a creeping line. and so on all the time. It’s like the regime can’t stop. and nothing else happens. There are no leaks or blockages. upon inspection and some analysis everything is normal. After assembly, nothing changes.
Please advise me in...

Last post

Candy cdcp6
It is possible that there is something wrong with the control board, it could very likely just be oxidation of both the contacts on the connectors and the entire board, there could be poor contact of the buttons. ... In general, you first need to get to the board, remove it, check the condition, check the contacts of the connectors and cables on the board, clean the entire board with...

1 Replies

4842 Views

Last post by Fulcrum
17 Feb 2023, 00:17

Return to “Hotpoint-Ariston”