Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me figure it out!
Win! There were no clamps on the water relay hose and the silicone hose expanded when heated and released pressure. The breakdown was very clever, I had to break my head, and there were no clamps...
Hans dishwasher 416. I turn it on, drains, fills, thinks and drains. The dishwasher is not leaking, the water pressure switch is activated, the tube and chamber are not clogged. Help me to understand!
Last post
I won, there were no clamps on the water relay, even from the factory.
Hi all. This problem happened. The dishwasher stopped heating and drying. I checked the filter too. What are the options - what else to see? It doesn’t give any errors. It washes cold and for a very long time (it feels like twice as much). I want to fix it myself - I have the hands. But we need to direct what to do, what to replace.
Last post
So look, I removed the thermistor. At a temperature of about 23 it shows 10290. Then I put it in water (about 60-70 g) - 1980. Moreover, this all happens quickly - 20-30 seconds. I watched the video and it said about 3 minutes. In general, what can you say? is it working or not?
Mobile version
Fulcrum
