Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Dear comrades! The low salt indicator has stopped working. The salt compartment is clean, I washed it, but it doesn’t do anything... But when you shine a flashlight inside the salt container, the indication lights up.... I changed the amount of salt according to the hardness of the water, but it didn’t give any result.... Please point me where to read.
Thanks in advance.
Dear comrades! The low salt indicator has stopped working. The salt compartment is clean, I washed it, but it doesn’t do anything... But when you shine a flashlight inside the salt container, the indication lights up.... I changed the amount of salt according to the hardness of the water, but it didn’t give any result.... Please point me where to read. Thanks in advance.
Good afternoon...maybe off topic...please tell me...
First PMM in my life and at the first start, when I poured salt into the compartment, I forgot to pour a liter of water there (as I later read in the instructions)... I started the car without water in the compartment.. the question is, is there a chance that the salt has already stuck together there? WHAT to do?
Second question: What in the...
BOSCH machine model SMS2HKW1CR/16
When you turn it on, the whole panel lights up, after about a minute it starts blinking, after a minute it lights up again.
And it no longer responds to any manipulations. Where could the problem be? Has anyone encountered this?
Good afternoon Please help. Suddenly, unexpectedly, at the moment of pressing the OK button, the indication of operating modes on the display panel disappeared. The inscriptions have disappeared - there is only a red screen on which these same inscriptions are not present. The machine nevertheless works, the “beam on the floor” shines and the lighting in the machine works when the door is opened...
please tell me, the Bosh SPV40E30RU/19 dishwasher suddenly broke down; the indicator light shows “out of salt”; the machine does not turn on, but only the pump sucks out water?
Good day! I have the following problem: I have a BOSCH dishwasher. It worked fine until today. The water supply to the splash guards stopped. It is supplied to the channel, the drain works. But not so much for mudguards. What could be the reasons and how to cure it?