Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Good afternoon I have an Electrolux, it’s 8 years old (I know it’s an old lady), I start the program, it starts washing and goes out completely, stops for 3 seconds then starts back up, during the cycle it can lose consciousness 6 times :) then it finishes its work. Is it over, or is it possible to prolong the patient’s life?
Good afternoon I have an Electrolux, it’s 8 years old (I know it’s an old lady), I start the program, it starts washing and goes out completely, stops for 3 seconds then starts back up, during the cycle it can lose consciousness 6 times :) then it finishes its work. Is it over, or is it possible to prolong the patient’s life?
try to get to the brain and check for swelling of the electrolytes on the power supplies or on the board. This is often the cause of any old technology.
try to get to the brain and check for swelling of the electrolytes on the power supplies or on the board. This is often the cause of any old technology.
Electrolux dishwasher. After collecting water, it washes for a couple of minutes, the relay clicks, and the program is reset. Please help me figure it out.
Last post
Check the heating element for breakdown. Perhaps the protection is triggered.
Hello. There is a problem with the PMM: when you turn on the program, it constantly drains water. The “master” has arrived. Everything was inspected and everything was in order. It was decided that the problem was due to low water pressure. Time passed, the pressure increased, the problem remained. I called the “master” again, this time a different one. He said that there was a problem with the...
The machine is 7 years old, the pipe was torn, they sealed it, now it’s completely fallen apart, I’m in St. Petersburg, delivery from Moscow, can anyone tell me what could replace it? art 1119165007
Last post
I picked up a filler neck for a car tank from an auto parts store to fit the size and changed it, put it on with glue and clamped it with clamps
Mobile version