First post
Good evening! PMM Beko din 15210. A problem has arisen: after washing the dishes are all covered in salt. I checked the regeneration valve, I thought there was a problem with the spring, I stretched it a little, it didn’t help. I rang the triacs in the control unit, everything is fine. Next, I launched a short washing program: the machine fills with water, heats the water - the water is not...
Last post
I had a similar problem, only replacing the salt exchanger did not change anything. As a result of many hours of dancing around the machine, the master found the reason and, accordingly, the solution - too much water pressure in the water supply system, respectively, too much water flow, under which the valve in the salt exchanger opens slightly, and the salt solution enters the washing chamber....
Mobile version
