Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Recently I encountered error 15. It is not described anywhere. The machine simply after draining the water (on any program), i.e. 2-3 minutes after the start of operation, error 15 appears. When the loads (heater, central engine) are turned off, the error codes change. Maybe someone has encountered something like this. Tell me, where is the dog buried?
Recently I encountered error 15. It is not described anywhere. The machine simply after draining the water (on any program), i.e. 2-3 minutes after the start of operation, error 15 appears. When the loads (heater, central engine) are turned off, the error codes change. Maybe someone has encountered something like this. Tell me, where is the dog buried?
Help with advice. After starting any program, water is pumped out, then water is drawn in, then after half a minute everything stops and 13 lights up on the display. I experimented: I removed the chip from the heating element, sat down with the cartoon and turned on the dishwasher again, the dishwasher started working, the voltage on the chip was 13 volts. I haven’t seen 220 volts even once since...
Good day to all! Dishwasher bosh SMV65M30RU/82, error E09 was displayed, called a technician, found out that the heating element had burned out, it seemed to come with the engine, he said that it could not be repaired, you had to buy everything assembled, he said the prices were not adequate, he thought that with the work everything would work out around 20₽ ((( Now I’m all wondering what to do,...
The loaded dishwasher with a short wash cycle (without drying) does not heat the water and constantly displays error E3, but if you just restart it for the same cycle without dishes, it heats the water perfectly and washes according to the program. The filters are clean. Well, it doesn’t want to work in the loaded version. The reason of that?
Last post
Is the hose for Indesit and Ariston suitable for PMM Krona?
Hello. There is a dishwasher etm48320l. After finishing any program, the door does not open automatically and error l44 flashes (this code no in the instructions). After a power reset, the error disappears and everything starts again. It works without errors only during the cleaning program and during the next wash, the next wash has an error. The dishes are completely washed. Thanks in advance...
Last post
In the service manual 44 is described as a strong/or weak signal from the Pressostat (read it a long time ago)
Mobile version
Автор темыpavel