Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
Partially built-in dishwasher Enna with a simple design, convenient control panel, and thanks to the removable front, this dishwasher fits perfectly to any kitchen.
Partially built-in dishwasher [b]Enna[/b] with a simple design, convenient control panel, and thanks to the removable front, this dishwasher fits perfectly to any kitchen.
*The stainless steel front, which is shown in the photographs, is included with dishwasher, but you can change it to a different façade to match the color of your kitchen
[size=85][b]*The stainless steel front, which is shown in the photographs, is included with dishwasher, but you can change it to a different façade to match the color of your kitchen[/b][/size]
For a partially built-in dishwasher Enna there is no top shelf and the front decorative panel is removable, a stainless steel panel is included. It is understood that this model will be built into the furniture, but for this it is not necessary to install your own decorative panel. The main advantage compared to built-in models is that the control panel is always visible.
A dishwasher is an ideal kitchen assistant in every home where they value time and do not waste it on washing dishes. It’s enough to choose a suitable model, fit it organically into the kitchen set of your apartment, and you can safely forget about the mountains of dirty dishes. In order to optimize the kitchen space, you should opt for the built-in option. This model is easy to install without...
• Ideal solution for a small kitchen
• Compact and spacious: 6 sets of dishes = ½ capacity of a 60 cm dishwasher, fits a 60 cm oven tray
• Maximum convenience: Quiet operation - 50 dB Possibility of using “3 in 1” tools LED display Timer 1-24 hours
• Savings: Water consumption per cycle – 7 l Noise level – 50 dB Width – 55...
Hello, dear forum users, I have a Bisch smv65m30ru/73 dishwasher. Yesterday a problem appeared - the machine began to leak drops from the hole near the left leg, as can be seen in the photo. Could you tell me what happened and what ways to solve the problem? Thank you in advance for your help.
Last post
Hello! I understand that this happened a long time ago, but now the same problem has arisen, there is no information anywhere. Did you manage to solve it?
Mobile version
