Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
I removed the SMV69T70RU/70 pan, and this was the only stop left. I can’t find a diagram of how it stood correctly and what it supported - please help with advice or a picture, please)
Hi all. I’m not an expert, but I want to repair the dishwasher myself. After power surges in the light, my machine stopped pumping water, but it turns on. Tell me: what needs to be looked at/changed?
I read it on the forums. Pump relay. What else could it be and how to check so as not to burn everything down😀😀Thanks in advance!
Most likely the heating element of the circulation pump burned out. It can be repaired or the pump assembly can be replaced. There in one pump there is both the pump itself and the heating part.
Sent after 5 minutes 53 seconds:
If interested, here is my experience outlined in a detailed video
-agfU5196cI
Dishwasher Midea. Only the power button works adequately, most do not. Programs do not switch, the cycle does not start. The door closing sensor is triggered by pressing the incomplete load button. The buttons are all working, there are no “stuck” ones. Model MFD 60S320W
Mobile version
